6n Electric Window Fitting Guide / Advice...
Posted: Sun Jun 29, 2008 5:12 pm
I recently obtained both mechs / motors and interior loom from a 16v 6n - i just need to find some electric window switches which were missing...
I've currently got a 1300 ADX 6N base spec model and want to fit the 16v door cards without winder holes so need to get the windows working!
Is there a guide anywhere? I've run a search with not much luck - just found some info on the repair kits...
If we start with a list of bits needed - so far i have:
Mechs / Runners
Motors
Door Wiring - Upto connector
Interior / Dash Loom from 16v.
I will need to get the switches but will i need anything else?
Thanks in Advance
Dave
I've currently got a 1300 ADX 6N base spec model and want to fit the 16v door cards without winder holes so need to get the windows working!
Is there a guide anywhere? I've run a search with not much luck - just found some info on the repair kits...
If we start with a list of bits needed - so far i have:
Mechs / Runners
Motors
Door Wiring - Upto connector
Interior / Dash Loom from 16v.
I will need to get the switches but will i need anything else?
Thanks in Advance
Dave