Page 1 of 1
Cubby hole.
Posted: Tue Jul 08, 2008 10:25 pm
by mintwithahole
Hi. On my 9N polo I have a tray on the top of the dash and I would like to swap it for a cubby hole weith a lid. I believe this can be done but have no idea how to. Could somebody please tell how to do this and what the part number of the cubby hole is?
Thanks.
Posted: Mon Jul 14, 2008 2:49 pm
by pip_polo
wanna swap cars, i have one?
i wanted yellow
lol
anyway.. you can get it from vagparts, works out at about £40 delivered, really simple, just pop the tray out and insert the little box. a few people have done it, it is alot better than the tray and more secure.
Posted: Mon Jul 14, 2008 4:56 pm
by charlievwp
I've done it. Best to use a credit card (or a card thats not too important just in case!)
Use it to slide around the edge of the existing to pop the clips and take out the tray.
The plastic of the dash is very soft so don't use anything metal or it'll ruin it!! 
Posted: Mon Jul 14, 2008 5:42 pm
by pip_polo
charlievwp wrote:The plastic of the dash is very soft so don't use anything metal or it'll ruin it!!
i have a small scratch from where i did mine
Posted: Mon Jul 14, 2008 9:01 pm
by charlievwp
Posted: Mon Jul 14, 2008 9:51 pm
by baileysufc
u want to get ur self a set fo trim clip reomovers the plastic ones ive got sum signet ones tehy cost me 10 quid and i us ethem every day at work very good for ann kinds of mouldinngs etc were things crnt be damaged
ill try find a pic
http://cgi.ebay.co.uk/S46715-5-Pce-Pry- ... otohosting
Posted: Mon Jul 14, 2008 10:58 pm
by pip_polo
they look usefull
Posted: Tue Jul 22, 2008 11:29 am
by lolhoward
Think i'm gonna order some of them tools. Look very useful, thanks. Gonna best offer though
