Page 1 of 2

wat size dish's for my rm's?

Posted: Mon Jul 28, 2008 11:13 am
by jason11
im in need to order mine within the next few days, wat size do u guys reckon?

1.5" and 2" rear, i will be running 195-45's as i have only just bought them :roll:

i am rougly 90mm and dont intend on going higher :P

help plz

Posted: Mon Jul 28, 2008 2:02 pm
by shantybeater
i'd say either 1" on the front & 2" on the back (so 7's & 8's) or 1.5 front & 2 back, I always wanted 2's on mine but it was a much more conservative look...

I was down over 100mm with 7's & 7.5

Some people have had issues going bigger than 7.5 but tomo for some reason had 8's & 8.5" RS's and had very little scrubbing :?
Image
Image
Image

Posted: Mon Jul 28, 2008 2:30 pm
by jason11
the guy im more than likely getting em from doesnt have any 1" in at the min so that's why i decided for the 1.5s but not sure if i will get much rubbing etc?

any one with any pics of a 1.5 and 2 on rear?

:wink:

Posted: Mon Jul 28, 2008 4:34 pm
by sorted
Mine on BBS RM.

8" (2" lips on the rear)

Image

205/45/15 tyres. Toyo proxies. Wouldnt recommend it to anyone to get the 8" - nothing but hassle - then had the arches flared - still had scrubbing. Down sized them to 1.5" rears and 1" fronts with 195/45/15 tyres all round >> much better and can get it a bit lower >>

Image

Posted: Mon Jul 28, 2008 5:55 pm
by shantybeater
why did you run 205's?? might have solved your problems if you had got 195's on the back..

Posted: Mon Jul 28, 2008 6:06 pm
by pologti76
shantybeater wrote:why did you run 205's?? might have solved your problems if you had got 195's on the back..
Same question im running 195's on the rear and i dont have any scrubbing. i no i have a different type of wheel but mine are an inch larger

Posted: Mon Jul 28, 2008 8:47 pm
by sorted
pologti76 wrote:
shantybeater wrote:why did you run 205's?? might have solved your problems if you had got 195's on the back..
Same question im running 195's on the rear and i dont have any scrubbing. i no i have a different type of wheel but mine are an inch larger
My 8" were an ET12. I ran them with 205 and 195 - was still just as bad!

Posted: Mon Jul 28, 2008 9:27 pm
by tomo87
definatly 1.5" and 2" jason...

and i ran 195/45 on a 8.5" !!!! hahah

Posted: Tue Jul 29, 2008 12:04 pm
by Silky V
7 and 8's seem about right.

You can get away with 8.5 on the rear depending on the offset.

Posted: Tue Jul 29, 2008 1:01 pm
by jason11
Silky V wrote:7 and 8's seem about right.

You can get away with 8.5 on the rear depending on the offset.
:P wat offset wud be ok to run the baring in mind i dont want constant rubbing and buying tyres 24/7 lol, plus remember how low i am ??

Posted: Wed Jul 30, 2008 12:48 pm
by Silky V
jason11 wrote:
Silky V wrote:7 and 8's seem about right.

You can get away with 8.5 on the rear depending on the offset.
:P wat offset wud be ok to run the baring in mind i dont want constant rubbing and buying tyres 24/7 lol, plus remember how low i am ??
What offset are your wheels?

Also is your car lowered 90mm all round?

Posted: Wed Jul 30, 2008 10:57 pm
by Tim_GTi
I take it your purchasing BBSs Jason? They normally have a pretty low offset, something in the region of 9-12?

If you want the 'down and out' stance then definitely go for 7.5 fronts and 8 rears, with 195/45 tyres.

I'm 8s all round with an offset of 25, and only get scrubbing when I corner hard with people in the back. I'm probably down about 80mm. Look here for pics, i'm now lower than i was at inters by about 15mm.

Posted: Wed Jul 30, 2008 10:57 pm
by Tim_GTi
I take it your purchasing BBSs Jason? They normally have a pretty low offset, something in the region of 9-12?

If you want the 'down and out' stance then definitely go for 7.5 fronts and 8 rears, with 195/45 tyres.

I'm 8s all round with an offset of 25, and only get scrubbing when I corner hard with people in the back. I'm probably down about 80mm. Look here for pics,

http://www.tigerstyle.co.uk/poloforum/v ... 005#299005

i'm now lower than i was at inters by about 15mm.

Posted: Thu Jul 31, 2008 1:04 pm
by jason11
yes tim ive got some rm's currently with mike the polisher getting a refurb :wink:

im 90mm all round id say yeah!

Posted: Thu Jul 31, 2008 1:30 pm
by sorted
jason11 wrote:yes tim ive got some rm's currently with mike the polisher getting a refurb :wink:

im 90mm all round id say yeah!
Im going to run round and steal them :lol: