Page 1 of 1

damaged coilovers..in desprate need of 1 coilover..NOW PICS!

Posted: Fri Aug 01, 2008 4:56 pm
by kersh
basicley iv bought a set of used coilovers from a seller i pt the two back on and every thing was looking gurd lowered the car around 80mm but as i came to do the front i found that 1 of the coilies was badly rounded in the allon key slot and other things wrong too :x

....sooo heres where you come in...... :roll:

any1 selling jst 1 coilover or no of anyone??? it would be appreciated if you can spred the word cos now im left with my arse scraping and my front gliding lol

comments welcomed

im also asking on the wanted section!! :?:

Posted: Fri Aug 01, 2008 5:52 pm
by kipper
do u know wat make it is? dont quote me on this but i dont think u could just change it, it would have to be the same one as different coilovers have different ride qualityetc so not totally sure it you could add just n e coilover.

Posted: Fri Aug 01, 2008 8:13 pm
by kersh
cheers bud, i hope its any coily cos the seller didnt tell me what make they were he ddnt know... and more help??

Posted: Sat Aug 02, 2008 1:01 am
by kipper
have a look on them, it will probably say the make somewhere, even try looking on the spring itself.

Posted: Sat Aug 02, 2008 5:11 pm
by Biddle
I doubt it matters to much to be honest mate. Not as if its a race car in which case it would be important. As long as ones not springy as fook and the other stiff it shouldn't matter to much. Post a pic up, someone will reckonise them.

Posted: Mon Aug 04, 2008 5:00 pm
by kersh
ok will do thanks for the help il have to get some snaps then

any luck finding 1 yet any1?

Posted: Tue Aug 12, 2008 6:11 pm
by kersh
rite every1 please help me find the make heres pics of the fronts cos the backs are on the car
Image


Image


any idears

Posted: Tue Aug 12, 2008 6:34 pm
by CraigMK4
EVO... Phil J sells them on Club Polo, PM him?

Posted: Tue Aug 12, 2008 6:49 pm
by polo_dude
^^Yup Phillj sells them.

Link to the coilover section:

http://www.clubpolo.co.uk/forum/index.p ... =0&start=0

Posted: Tue Aug 12, 2008 7:23 pm
by kersh
cheers lads i really do appreciat the help! :wink:

Posted: Tue Aug 12, 2008 11:53 pm
by CraigMK4
No problem bud!