UK-POLOS.NET - THE VW Polo Forum

based on mk2 golf but could be adapted to any car

Here goes

First you need to decide where to place your tweeters



Then fix into place with a dab of fibreglass/resin



Next lay over a sheet of fibreglass matting and paint with resin, leave to dry. i also use fibreglass tissue.



Trim off excess fibreglass



Cover with bodyfiller



Next smooth down with 80 grit wet and dry to a rough shape



Add some more filler, less this time, and smooth down with 240 grit wet and dry



repeat last step but using 800 grit wet and dry, i did this twice the last time i smoothed usibg the paper WET



Now apply a mist layer of primer, leave to flash, keep applying light layers until its completely covered



your now ready to apply your colour of your choice

tweeter pods done

Good Guide man

Could be generalised to any kind of small fiberglassing job to a newbie
Which i am, will use this guide many times in the future me thinks

Thanks

Gd effort m8. Theres also a nice wee guide on audio talk if anyone wants another way of doing them

Aye that's really smart. Think I'm gunan try a few things out with fibreglass for my next system build