UK-POLOS.NET - THE VW Polo Forum

Hello there,

I know this has been discussed before...but could somebody who has done this to there polo please give me a detailed discription along with pictures if possible....as other threads have not given enough details as how to remove the wires....

Thanks
KJ

i did it on mine and wrote a how to guide youl find it in how to section/guide somewhere i cant remember how to do it as it was quite a while ago

stig247 wrote:i did it on mine and wrote a how to guide youl find it in how to section/guide somewhere i cant remember how to do it as it was quite a while ago

I know mate...i had a look....only trouble is that i cant get the wire out...

Could you shed some light.

Cheers
KJ

Any body!!!!!

you can buy a tool to remove the pins from the plug. Snap-on Bluepoint do them.

panda wrote:you can buy a tool to remove the pins from the plug. Snap-on Bluepoint do them.

Could you send me a picture of the tool...

I think you need to use two very small screwdrivers once you get one out youl know how to get the rest out very easily, sorry i cant be of more assistance i just cant remeber how i did it

Has anybody seem the adaptor port for the conversion on ebay?even the german ebay?

Well Everybody....Sorted out the tail lights today.....After its done.....i would say its easy as hell.....
here are the snaps:


Only adjustment needs to be done on the left/passenger side.....and its the same on the driver side....

stig247's guide was useful but I developed a new technique as how to remove the pins from the adaptors......so will be soon posting a updated guide.....

Anyways...PM if anybody who is thinking of changing to 9n3 tail lights....

KJ