Page 1 of 2

Coming to the end.... smoothing!

Posted: Thu Oct 09, 2008 1:47 pm
by sorted
Hello,

So..you get the bumpers smoothed, the boot, and the bumpstrips on the side and finally the front wings.... so what is actually left on the small scale side of smoothing?

Things I can think of are,

1. The Ariel
2. The two panels underneath the rear lights (between bumper and light)
3. Smooth the splitter in
4. The HID washers

What else would anyone smooth that on the small side of smoothing that will make a little diffrence?

Neil

Posted: Thu Oct 09, 2008 2:01 pm
by JPR_polo_gti
door handles.... :|

Posted: Thu Oct 09, 2008 3:34 pm
by 1der
roofstrips

Posted: Thu Oct 09, 2008 3:46 pm
by jason11
bonnet, but i dont like it done on mk5's :P


note much really as above to be honest

Posted: Thu Oct 09, 2008 4:00 pm
by h4r1s
side repeaters possibly?

Posted: Thu Oct 09, 2008 6:44 pm
by sorted
JPR_polo_gti wrote:door handles.... :|
Dont like the handles done - looks too smooth...

Got the side reapeaters done already!

Roof strips lol bit OTT!

Posted: Thu Oct 09, 2008 6:46 pm
by sorted
BTW - this is my car the now... its going in at the end of the month for the side strips to be done so thats why im asking - as this is the last time im putting it back in to get work done....

Image

Image

Posted: Thu Oct 09, 2008 8:29 pm
by 1der
smooth the spoiler into the boot?

Posted: Thu Oct 09, 2008 10:37 pm
by Silky V
Don't get your splitter smoothed into your bumper.

Reason being is, if you hit your car going over a bumper you'll end up paying to get the bumper and splitter done instead of just the splitter.

Posted: Thu Oct 09, 2008 11:08 pm
by big_k
What Silky just said... my cars pretty damn low as far as 6n2's go and my splitter is DESTROYED! Its not even straight, i love silky's carbon splitter but to spend that much on a splitter and smash it is just too much of a risk for me.. same thing applies to your bumper! You'll crack the entire thing!

Posted: Thu Oct 09, 2008 11:13 pm
by Si_GTi
Yes, I often scrape my plastic front splitter against all manner of kerbs, don't do it!! :?

Posted: Fri Oct 10, 2008 9:09 am
by one_must_fall
I've often wondered what it would be like to have the boot smoothed into the rear of the car. It would take some guts...

I vote for the roof.

Posted: Fri Oct 10, 2008 10:03 am
by kipper
f u wanted to get rid of ur fog lights u could always smooth the 2 lower outer grills. thats wat i plan on doing but i dont have fogs n e way.

Posted: Fri Oct 10, 2008 10:41 am
by Tim_GTi
Yeh like said before don't get the splitter done, it does look good (Tom had it done on his) but you'll most definitely be going back to get it fixed at some point.

Roofrails aren't OTT I don't think. They're a good call, something you wouldn't notice gone if you weren't an avid 6N2 fan, which is the whole point of doing it.

Don't get the spoiler done, I did a photoshop of it years ago and it didn't look good.

Headlamp washers are a fair call, down to personal oppinion though I guess. I think it makes the car look more modern and top of the line. Notice all the top vags have them. I think it's one of distinguishing features.

Be carefull if getting the panels under the rear lights done. They are very likely to crack again, if not smoothed using a welded on plate before hand.

Aerial is a good call.

Rear bumper recess may look good, if you put the palte back in the same position after. You'd struggle for plate lights that don't look silly however.

Posted: Fri Oct 10, 2008 3:05 pm
by Overseer
sorted wrote:Got the side reapeaters done already!
Relocated them or just got rid?

Whats the law on side repeaters anyway?