UK-POLOS.NET - THE VW Polo Forum

My car is just sitting there, and I'm going to end up selling it to a trader. So would rather break the mods down.

Suspension - Eibach coilovers 4k miles in excellent conditon come with box £300.

Exhaust - Milltek turbo back system - full exhaust & sports cat with downpipe £400.

FMIC - Forge FMIC specially designed for the 1.8T Polo GTI £350.

I've priced sensibly considering I have to pay labour to have these parts removed from my car. If someone exhaust & fmic they can help themselves to APR diverter valve, green panel filter, PD160 intake and red forge pipework for turbo & air intake (these aren't for sale separately).

I will have all work done at APS in Brackley.

How low does the eibach suspension go down? venom motorsports website says front 10mm to 40mm, rear 15mm to 45mm on the GTi but on a standard polo 9n3 its front/rear 35mm to 65mm?

http://www.venommotorsport.com/manufact ... o%20Mk%205

And how come your not selling your forge TIP separate?

flyfs6... you have PM!

Rich_T wrote:How low does the eibach suspension go down? venom motorsports website says front 10mm to 40mm, rear 15mm to 45mm on the GTi but on a standard polo 9n3 its front/rear 35mm to 65mm?

http://www.venommotorsport.com/manufact ... o%20Mk%205

And how come your not selling your forge TIP separate?

Don't know how low but low enough to leave mm gap between tyre/arch wing. Full on decked look . Also so low that the bottom plastics/sills would rub on car park speed breakers.

I won't sell the tip and other things until fmic etc are off the car.

pm m8

Is all the gear for a 1.8turbo then???

cheers mate

Its all off a 1.8T, but the coilovers will fit onto any 9n chasis Polo, Ibiza, Fabia etc. So might the exhaust.

Interested in the coilovers...

Pm'd ya about the Milltek mate, I will take that off ya and ma also be interested in the FMIC too. Can u do any kind of deal for the two?

Thanks for interest. Everything is provisionally sold pending payment & removal from car (next Wednesday). So will keep you all posted if the situation changes.

Interestd in the pd160 intake if you want to give me a price.

Cheers