Page 1 of 1

Undertray Removal

Posted: Sat Feb 07, 2009 1:50 pm
by Tim_GTi
To save me some faff next Friday. Can anyone give me a quick low down of getting the undertray off? Does it need anything special or just a good yank?

Re: Undertray Removal

Posted: Sat Feb 07, 2009 2:16 pm
by kinder
there are four clips on the side and if urs still has them in at the back of the tray it should have a clip either side but they do tend to have fallen off

Re: Undertray Removal

Posted: Tue Feb 10, 2009 6:37 pm
by Trottagti
U also have two bolts either end attaching it to the chassis legs if i remember correct, or maybe one each side, might be a 10m or 13m bolt! I think!

Re: Undertray Removal

Posted: Tue Feb 10, 2009 8:28 pm
by alexperkins
two 13mms at the back of it ;)

Re: Undertray Removal

Posted: Wed Feb 11, 2009 12:25 am
by Tim_GTi
Cheers, got my supplies from GSF now. Roll on Friday.

Re: Undertray Removal

Posted: Wed Feb 11, 2009 8:23 pm
by Trottagti
alexperkins wrote:two 13mms at the back of it ;)

Wotever lol!

Wot u fitting neways fella???

Re: Undertray Removal

Posted: Wed Feb 11, 2009 11:18 pm
by Tim_GTi
Coolant drain and oil change.

Then next time it'll be pollen filter, fuel filter and brake bleed.

Re: Undertray Removal

Posted: Thu Feb 12, 2009 7:34 am
by alexperkins
Be sure to flush to your coolant pipes thru with fresh water before you refill!

Re: Undertray Removal

Posted: Thu Feb 12, 2009 10:52 am
by Tim_GTi
aye 8)

Re: Undertray Removal

Posted: Thu May 21, 2009 12:55 am
by Sutch
Gotta get mine off and refix it tomorrow as towards the back of the car it is hanging down horrifically..

Now I'm pretty sure I'm losing many of these said clips, anybody done any custom fixing to keep it in place?

Cheers, Ed!

Re: Undertray Removal

Posted: Thu May 21, 2009 7:46 am
by Tim_GTi
Yeh I wore a hole in mine, just used metal brackets. The type you'd get from B&Q.