Page 1 of 1
main beam bulbs to suit 6000k hids ?
Posted: Sun Mar 15, 2009 11:57 pm
by ceedubya
what make/model of main beam bulbs best match the colour of a 6000k hid kit on a 9n ?
Re: main beam bulbs to suit 6000k hids ?
Posted: Mon Mar 16, 2009 12:38 am
by Tim_GTi
A H1 6000k HID kit

Re: main beam bulbs to suit 6000k hids ?
Posted: Mon Mar 16, 2009 1:11 pm
by ceedubya
Tim_GTi wrote:A H1 6000k HID kit

they take too long to warm up to the correct temp tho so they will just be getting bright then switched off
Re: main beam bulbs to suit 6000k hids ?
Posted: Mon Mar 16, 2009 5:19 pm
by pip_polo
hids are no good for flashing, i'm alse interested to see what people use as over 6k mainbeam is really yellow
Re: main beam bulbs to suit 6000k hids ?
Posted: Mon Mar 16, 2009 8:46 pm
by chewy
I am going to buy a set off the bay too see what they are like. They aint on for long so might last awile
Something like
these
Re: main beam bulbs to suit 6000k hids ?
Posted: Tue Mar 17, 2009 3:28 am
by Tim_GTi
HIDs are fine for full beams, I use them.
They naturally have a burst of full power when you flash them, so they are fine for that.
They then power down and build up brightness after around 7 seconds. This only has to be done to warm the bulbs up though, once you've powered them up once they'll be good for 5-10mins before having to do it again.
I'd never use any other type of bulb!