UK-POLOS.NET - THE VW Polo Forum

I have finally got my wheels and stuff on so I thought I would get some pics posted! Here is the spec as it stands:

VW Polo TDi Sport 100 PD - Pearlescent Metallic Grey
Superchips Chip (Around 130BHP)
BBS RXII 2 Piece Alloy Wheels (Summer) Black with Silver Lip
Goodyear Eagle F1 195/45/16 Tyres
VW Bora 16” Steel Wheels (Winter)
Uniroyal Rainsport 195/45/16 Tyres
Genuine VW Wheel Bolt Caps
Audi TT 312mm Front Brakes
Ibiza FR/Fabia vRS/Polo GT Front Hubs
20mm Hubcentric Rear Spacers
New Discs
Brake Calipers Painted Black
Weitec Hicon TX Dampening Adjustable Coilover Suspension – Springs Painted Black
Ibiza Cupra Top Mount Bearing - 6N0 412 249 C
Ibiza Cupra Top Mount Bush - 6Q0 412 331 B
Whiteline Fabia VRS 24mm Front Anti Roll Bar – Painted Black
Ford Mondeo (93-00) Front Drop links
Jabbasport Fabia VRS 23mm Rear Anti Roll Bar – Painted Black
Seat Sport Front Upper Strut Brace - 6L0 071 710 – Painted Black
Ibiza Cupra Front Wishbone Console Bushes - 6LL407183
Powerflex Front Wishbone Bushes – PFF85 - 601
New Bolts throughout
Ibiza Cupra Dogbone Mount - 6Q0 199 851 AT
Vortex Rear Bumper
VW Sharan Short Aerial
VW/Audi Autohaus Wolfsburg Number Plate Surrounds
















Let me know what you think!

Just thought I would post a new thread as I have changed quite a bit since last time!!

Looking good. Bigger breaks or next in my list

Looking good mate, bet that's a bit of a sleeper I'd imagine it troubles some more "sportier" cars round the twisty B-roads.

Where did you source the front hubs from and for how much (if you don't mind me asking)? Is it an easy job to do?

Cheers,
Ash

Yeah Clio 172 drivers hate me, well after they see the dirty diesel badge anyway, lol.

I gave £120 for them but that was pretty cheap, you are looking at £80 a side plus VAT usually, I only got them cheap cos a Breaker owed my brother a favour! Just have a look on eBay and in breakers. Any Ibiza FR/Cupra, Fabia vRS or Polo GT has the correct hubs and they arent a difficult task to fit, we did both sides of mine in 3 hours taking it steady.

Looking good. Exact same wheels as ive got and same colour car aswel

Im looking to get bigger brakes (and convert from drums on the back).

Are the cupra top mounts a straight swap......

used George's parts list above for mine and the top mounts and top mount bearings fitted no problems.

Yeah top mounts fitted no problems, Not sure if there are any differences TBH but better safe than sorry, and I think they were cheaper if I remember correctly!

Great spec! Although not sure on the front ARB - a bigger one will induce more understeer and you've got stiffer front springs anyway. Just my 2p.

Other than that, a nice motor (good choice of engine too )

Yeah the Front Anti-Roll bar in hindsight would have just been changed for a Fabia VRS one, as it does provoke a little understeer, however, with the large rear one, you can control where the car is going with the throttle and brake a little, enough to scare passengers anyway, lol!

Thanks for the positive comments! I'm itching to break 200BHP now but I am in two minds!!

I own this car now, would like to know a little more about it, anyone here know who it was sold too?