custom boot install shelf
Posted: Mon Sep 14, 2009 3:20 pm
i made this boot build last year but i changed my setup. basically the amp is placed on the standard carpeting in the 6n2, and then this MDF covered in carpet peice goes on top and hides the wiring, and then you can sit the sub on top. although i used 2 mdf peices, one for the bottom for the amps to sit on and then the top one(which is the one for sale), however i only have the topshelf
Heres a few pics to show what i mean
The bottom shelf which is NOT included in the sale
the topshelf
Topshelf covered in matching colour carpet for the 6n2
This will fit straight on top of the little ledge thing behind the seats but in order for it to sit on the bottom end, i used some wood blocks.
This is how it looked with a sub in it as well
Makes the boot leak tidy without the hassle of wires everywhere
30 quid
Based in walthamstow, East London
Heres a few pics to show what i mean
The bottom shelf which is NOT included in the sale
the topshelf
Topshelf covered in matching colour carpet for the 6n2
This will fit straight on top of the little ledge thing behind the seats but in order for it to sit on the bottom end, i used some wood blocks.
This is how it looked with a sub in it as well
Makes the boot leak tidy without the hassle of wires everywhere
30 quid
Based in walthamstow, East London