Page 1 of 1

polo 1998 1.4 16v model

Posted: Wed Sep 30, 2009 7:08 pm
by polo-liam
rite my gf has a 1998 1.4 16v polo she has owned it for over ayear now. we had a look at it as the mot runs out in a few days and we noticed 3 thing that will need doing for the mot exshault is blowing, passenger side caliper will need replacing as when we replaced the pads the piston wouldnt go all the way in. i do have a spare one for it but not sure if its the right one. and also the steering rack gaitor has split. evrything else seems fine. tax and mot will run out in the next couple of days.
also the throttle body is playing up common problem. power locks dont work. thing in the boot doesnt work. all electric windows work and so does the electric mirros.
there is a few bits of rust some on the back arch soem on the passenger door and on the sills but just bubbles nothing really that bad.
interior is fine with no rips that i know of just need a clean. all gauges work fine. it has a twin back box on it sounds nice all but the blowing that aint that loud really. its been lowered on fk suspention 60mm i got told but i think the back is 50mm and the front is 60mm. 15 inch compotive alloys the 5 spoke white alloys wiv all good tyres on the them. bit of rubbing when u hit a bump etc. if u need any more information information please ask.

im looking for 550 ono.


Image
Image
Image

Re: polo 1998 1.4 16v model

Posted: Wed Sep 30, 2009 7:11 pm
by polo-liam
oh for got to say the enigne is on 60000 miles and have loads and loads of receipts the previous owner had spend 2000 on new parts.
its has a new water pump new cam belt new spark plugs new ht leads and new oil not that long ago.
oh i have a spare electric window motor and spare ht leads that can go wiv it

Re: polo 1998 1.4 16v model

Posted: Wed Sep 30, 2009 10:19 pm
by M@Turner
Where is the car located???

Ta

Re: polo 1998 1.4 16v model

Posted: Sat Oct 03, 2009 6:33 pm
by polo-liam
codicote in hertfordshire

Re: polo 1998 1.4 16v model

Posted: Mon Oct 05, 2009 11:32 pm
by martin smith
hi very interested in car is it still available torvice history does it have when was camvelt done and at what mileage view can you let me know if can come and view cheers how much service history does have when and what mileage was cambelt done

Re: polo 1998 1.4 16v model

Posted: Tue Oct 06, 2009 5:33 pm
by polo-liam
yer its still avalible it has quite alot of service history and 2bh it has so many recipts for like new dials alot of stuff has been replaced.and the cambelt was done 7000 miles ago max. was done this time last year when it had the mot and waterpump. there 2400 pounds worth of receipts which have been payed for the last 2 years . alot of money has been pu tinto the car as u will see from the recipts when u come view it. upto u when u want to view the car i fin work at 1 every day this week and have next week off so any time is ok. p.m me and will give address so u can view it

Re: polo 1998 1.4 16v model

Posted: Thu Dec 10, 2009 2:23 pm
by Ali Sey
how much for the wheels