UK-POLOS.NET - THE VW Polo Forum

BBS Mahle Reps made by rimmstock.

All the info you will find on the link provided.

Spend most of my time on cp, so if your a member on there then pm me on cp, if not then contact me on Jordan.Fuge@googlemail.com as you will get a quicker response. Cheers

http://www.clubpolo.co.uk/forum/index.p ... try1756427

Heres the add copied from CP

Got some wheels lying around that need rid of. The pcd isnt stamped on the wheels, but they are a smidge short of 4x100, have tried them onto a mates 6n with wobble bolts and they fit fine, when i say a smidge i mean a smidge so might just be the fact im measuring them with a measuring tape. Paint is in good condition. I bought them when I bought my first 6n2, was going to refurb them and have them fully polished. After seeing afew 6n2's with 13's decided that they just cant pull it off. They dishes are not mirror polished, could be gone over with a higher grit sand paper in order to get them up closer to a mirror finish. Could be gone over with meguiars polish to bring them up nicer, no curb damage at all.

Spec:

13x6
et13
4x100

£200 collected or £220 posted

Based in Swansea














Email me on Jordan.Fuge@googlemail.com as you will recieve a faster response.