Page 1 of 1
One touch function on electric windows.
Posted: Sat Jun 05, 2010 9:05 am
by Bradley
I noticed lastnight the one touch function has given up on my drivers side window.Just wondering really if anybody knows how to reset it as i really cannot remember haha.Im sure hold button down for so long something something.
Any help please
Brad
Re: One touch function on electric windows.
Posted: Sat Jun 05, 2010 9:58 am
by john.p.clegg
Bit fuzzy but try ignition key in drivers doorlock,right- count to two,left-count to two....or something like that..
John
Re: One touch function on electric windows.
Posted: Sat Jun 05, 2010 12:48 pm
by MrP
1. ignition on
2. make sure the window is fully up
3. Put the window all the way down and continue to hold the switch for a further 10 seconds
4. Put the window alll the way up and continue to hold the switch for a further 10 seconds
It should be working now..
Some times I have to repeat the process for it to work.
Re: One touch function on electric windows.
Posted: Sat Jun 05, 2010 5:16 pm
by john.p.clegg
From the book
1 Close all windows and doors
2 Use the key to lock the vehicle from outside and hold the key in the locking position for over two seconds
3 Repeat step 2
John
Re: One touch function on electric windows.
Posted: Sun Jun 06, 2010 9:22 am
by Bradley
Thankyou both for the replies,john i tried your method first off and it worked a treat so thankyou very much for that.
Thanks again guys.
Brad
Re: One touch function on electric windows.
Posted: Sun Jun 06, 2010 9:51 pm
by john.p.clegg
No Problem,all I have to do now is try to remember if mine has folding door mirrors or not,ain't it a bummer when you get old!
John
Re: One touch function on electric windows.
Posted: Mon Jun 07, 2010 6:40 pm
by Bradley
john.p.clegg wrote:No Problem,all I have to do now is try to remember if mine has folding door mirrors or not,ain't it a bummer when you get old!
John
Haha your polo you mean with folding mirrors?.Sounds very interesting,again thanks for the quick helpful reply.