Page 1 of 1
Fitting a Polo 9N3 GTI exhaust to a Polo 9N
Posted: Thu Jul 15, 2010 7:05 pm
by timefalls9n
hey there guys, i know a lot of you have done it so now it's my turn
what size exhaust reducer is needed? Any info or an ebay link would be greatly appreciated!
Re: Fitting a Polo 9N3 GTI exhaust to a Polo 9N
Posted: Fri Jul 16, 2010 12:52 am
by RITCHAT
don't need any reducer mate cut the new back box if that is all you are fitting with a inch cut at the end so that when you use a u clamp it will tighten around the old pipe and use exhaust putty to seal That was what I did to mine as only 1 mm difference in diameter so no problems.
Re: Fitting a Polo 9N3 GTI exhaust to a Polo 9N
Posted: Fri Jul 16, 2010 6:31 pm
by timefalls9n
cheers for your reply mate. I have the gti catback and would prefer not to cut it if possible! or is cutting it the only way to get it to fit?
Re: Fitting a Polo 9N3 GTI exhaust to a Polo 9N
Posted: Tue May 17, 2011 4:14 pm
by Joefield
i want to do this too but i cant find a decent price for the gti exhaust, all i want is the back box not all the pipes,
can any1 send me a link ?