UK-POLOS.NET - THE VW Polo Forum

Was cleaning my wheels sunday and noticed im missing 1 screw, that keeps the split rims together, where can i get a new one from?

Also, should they really be able to just come loose??

Err that would worry me matey.

I'd double check it isn't snapped inside the wheel.They shouldn't be falling out thats 100% sure,if i was you i would check every bolt on every wheel and make sure they're tightened properly.I don't know the correct torque setting for them but someone else may do.

Bradley wrote:I don't know the correct torque setting for them but someone else may do.

20NM then 30NM as explained in the pdf bbs alloy diy guide i've got

justmatz sell them....and dont you have a spare set of bbs lol

alexperkins wrote:justmatz sell them....and dont you have a spare set of bbs lol

Yeah i do mate, didn't even think about that, will have a proper look tomorrow, its in the garage for an oil change will get him to check them.

And yes i do, but want to sell them complete.

But i know what your saying, might have to rob one and put the new one in the spares.

Also guys does anyone know what the correct size torque bit is? Think i should invest.

M6 Spline bit mate. Dont go as high as 30 they can snap. 25nm is tight enough

Cheers man. Searches ebay....

http://cgi.ebay.co.uk/Laser-6-Piece-Spl ... 500wt_1154 voila

Yeah i found a few, bidding now.

happy days

The Torq bit I have is VM8, very unusual size but is exactly right for the wheels

Oops my typo it is M8 not M6 lol

http://cgi.ebay.co.uk/Franklin-Tools-M8 ... _799wt_911

That's what you need

Bought one myself a bit ago.

emma_88 wrote:http://cgi.ebay.co.uk/Franklin-Tools-M8 ... _799wt_911

That's what you need

Bought one myself a bit ago.

Ta, very much.