Page 1 of 1
Disc diemensions
Posted: Fri Feb 18, 2011 5:45 pm
by g__humm
Can anyone tell me the disc diemensions of the following
the centre bore (hub hole)
and the total hieght of the disc when laying flat and also the disc thickness
If you take measurements gotta be a brand new disc thanks
Re: Disc diemensions
Posted: Fri Feb 18, 2011 6:06 pm
by 88rsr
on yours mate? the centre im not 100% but either way it'll be a little larger than 57.1 which is the bit the wheel sits on
total height is 34mm, the disc itself 25mm thick
Re: Disc diemensions
Posted: Fri Feb 18, 2011 6:07 pm
by 88rsr
it should be 65mm just found it... the centering bore
Re: Disc diemensions
Posted: Fri Feb 18, 2011 6:16 pm
by g__humm
Ok cheers if ur wondering y I need custom disc bells made for the porche brakes I have.
Re: Disc diemensions
Posted: Fri Feb 18, 2011 6:27 pm
by g__humm
Are you 100% sure with these measurements. They will be 312mm discs
Re: Disc diemensions
Posted: Fri Feb 18, 2011 10:07 pm
by 88rsr
thats what i got from 288s which fit the polo, or the other option is to check some out at a motor factors, should be same as mk4 288s
Re: Disc diemensions
Posted: Sat Feb 19, 2011 12:09 am
by g__humm
I will check some 312 that me bro gonna take off should be the same sizes cos that's what there going to be size wise