Page 1 of 1
Measurement Required
Posted: Sun May 16, 2004 11:32 am
by Josh_PoloGTi
Calling a GTi Owner that has NOT lowered their car, please can you measure between the middle of the wheel arch (the lip) and the centre of the wheel (in the centre cap).
If you could measure using mm, that would be cool.
Posted: Sun May 16, 2004 8:33 pm
by Prash
i'll go have a look now for u
Posted: Sun May 16, 2004 8:51 pm
by cyhliu
Ha ha ha, I was about to post a similar posting...
Cheers Josh, I think I know what you are doing and I was about the do the same...
Posted: Sun May 16, 2004 8:52 pm
by Prash
I measured 350mm from the top of the arch (end of lip) to the centre cap of the wheel, hope this helps
Posted: Sun May 16, 2004 8:53 pm
by cyhliu
Ha ha ha, I was about to post a similar posting...
Cheers Josh, I think I know what you are doing and I was about the do the same...
Prash, if you could do so, I'd appreciate it, cheers!
Posted: Sun May 16, 2004 8:56 pm
by Prash
so what are u upto then
?