UK-POLOS.NET - THE VW Polo Forum

H&R 35mm front/55mm back.

Vnice, il have to get my 4x4 lowered sometime

lowered on vw origional lowering springs 30mm all round, has settled at the back now nicely

]

Lowered on Bilstein B16 PSS9's - PSS10's not available for the Polo.

Rear is fully down on the thread, the front has another 1/2 inch of thread left to lower.

Hurdy wrote:Lowered on Bilstein B16 PSS9's - PSS10's not available for the Polo.

Rear is fully down on the thread, the front has another 1/2 inch of thread left to lower.

Hurdy man, your car has got it goin' on!

one sweet looking gti there.

Cheers guys.

h17rry wrote:lowered on vw origional lowering springs 30mm all round, has settled at the back now nicely

Nice little gain there, how much are the VW original parts are presumably it won't affect warranty ?

GR33NIE wrote:

h17rry wrote:lowered on vw origional lowering springs 30mm all round, has settled at the back now nicely

Nice little gain there, how much are the VW original parts are presumably it won't affect warranty ?

Won't affect your warranty but they don't sell them in this country. I believe Harry had to source them from Germany and pay for them fitting at a (non-vw) garage as they wouldn't go near them over here.

Cheers for the info!

yep had them shipped in from germany, warranty shouldnt be impacted aa not sure what impact 4 lowering springs could have on the overall parts. I would definately recommend them tho...

H&R 25/40

auspolo wrote:H&R 25/40

'kin ell that looks proper sorted.

I love them TSW wheels above

Can someone tell me, are those 17's or 18's on that last car? (grey 5 door)

Thanks