Page 1 of 5
.
Posted: Sun Mar 18, 2012 10:44 pm
by morells
.
Re: My New Silver Polo Gti 9n3
Posted: Mon Mar 19, 2012 7:10 pm
by lukey GTI
ahhh mate bet your gutted . both cars are top notch .. the gti wont disappoint you tho.
revo stage one is good for 210bhp.. just get a panel filter or a cone and a forge 007/008p diverter valve + seat leon 160pd intake
i have 20 mm springs but if i was you id get 35mm H&R srings or go for coilovers ill be changing to get some ap coilovers soon
a white line rear anti roll bar is always good too
.
Posted: Mon Mar 19, 2012 7:19 pm
by morells
.
.
Posted: Mon Mar 19, 2012 7:50 pm
by morells
.
Re: My New Silver Polo Gti 9n3
Posted: Mon Mar 19, 2012 9:43 pm
by 9N3 Turbo
morells wrote:
The first thing i want to ask is what do i have to do to my car to get a stage 1 revo map done
2) whats the ride like with either springs or coilovers fitted? i.e. is the ride to bouncy or stiff?
3) has anyone fitted a mk5 golf gti gear stick to there gti if its even possible
4) is it possible to get the cup edition body kit from our dealers or do we have to get it from somewhere abroad?
and finally 5) are there any common faults or issues that i should look out for on the 9n3's?
thanks in advance for the answers and am looking forward to looking around the fourm and collecting all your knowledge and advice
To go stage one you don't need to do anything. You can it it straight away if you wish.
Can't comment on springs but everyone including me will say get coilovers I find the ride fine with my fk's.
I have fitted an edition 30 gear knob so yes it can be done. Yes you get get the cup kit from the dealers but be warned it isn't cheap and also you have to factor it the cost to paint it. Common fault is the syncro going on second gear 06 and 56 seem to suffer from this. Hope you enjoy your polo as much asthenosphere rest of us on here. Feel free to have a look through my build thread Black polo gti 6speed
Re: My New Silver Polo Gti 9n3
Posted: Tue Mar 20, 2012 4:28 pm
by LawShe
Completely off topic but is that picture of the two Audi's taken at a hotel in Oxford?
.
Posted: Tue Mar 20, 2012 5:47 pm
by morells
.
My New Silver Polo Gti 9n3
Posted: Tue Mar 20, 2012 9:43 pm
by lukey GTI
You get it from a seat garage
Hope this helps the prices may have changed . I think seat realised every one wants them lol
Seat Cupra PD160 console bush
Rubber mounting 6LL 407 183 £7.78
Seat Cupra PD160 air intake
Trumpet 6LL 129 621 £14.91
Pipe 6LL 129 618 £24.11
.
Posted: Tue Mar 20, 2012 11:27 pm
by morells
.
Re: My New Silver Polo Gti 9n3
Posted: Tue Mar 20, 2012 11:41 pm
by Voodoo
Tbh for the price i don't know if its worth getting pd 160, there is one going on ebay for 83 quid
. the stealers have probably realised they can make a quick buck of this and probably charge about that aswell. I'd keep your money and put it towards a remap
My New Silver Polo Gti 9n3
Posted: Wed Mar 21, 2012 7:58 am
by lukey GTI
It mite not have gone up tho . I'll go have a look today if I get chance
.
Posted: Wed Mar 28, 2012 7:49 pm
by morells
.
.
Posted: Wed Mar 28, 2012 7:56 pm
by morells
.
Re: My New Silver Polo Gti 9n3
Posted: Wed Mar 28, 2012 9:20 pm
by Dennis
you don't see many 9n3 GTI's in this colour!
looks nice!
you selling the chrome OEM front badge maybe?
.
Posted: Wed Mar 28, 2012 9:49 pm
by morells
.