UK-POLOS.NET - THE VW Polo Forum

Hi there I'm having trouble finding a fault on a polo 6N2. It basically has not dash lights but will crank and not start. I've managed to obtain some wiring diagrams and it seems the immobiliser runs through the clocks!!
I've plugged the car into VAGcom and it won't communicate with the ECU. I've checked all the ignition supply's to the ECU and all are fine. Anyone any ideas on this?
Immobiliser fault?
Faulty clocks?
Any help would be greatly revived
Thanks for looking

The immob doesn't go through the clocks.

Is it a diesel ?
Does the fuel pump prime ?
Are you getting dash lights for the engine itself, ie: check light, emissions, if it's a derv, coil ?

Sorry should have mentioned its a 1.4 petrol. I have no dash lights at all. Nothing lights up on the instument panel.

Hi mate the immob ecu is completely seperate, all good to run with no clocks

Cheers
Alba

I have the same problem, no lights on the dashboard , the starter works and the engine will not start .
How is that decided ?
What was the problem?
Tks.