UK-POLOS.NET - THE VW Polo Forum

I all, if some of you who visit Porka are aware I have a variety of modified ECU maps avaiable for the AAV 1.3 55bhp, 1.3 NZ 55bhp, 1.3 3F 75bhp, and for the G40 as well. I have a number of other VAG chips available.

I have had Rolling road data back from a before and arfter with the GT chip and a gain of 6bhp was recoreded with a Decat exhaust and air filter mod.

All the AAV, 3F, PY chips are available for £26 including postage, and the early NZ engine are available for £35 as the eprom they use are very rare as they are no longer manufactured

All chips are supplied with very detaileed fitting instructions and a nice storage box to retain your original eprom. I can also solder eprom sockets into later Mk3 ECU to allow tuning chips to be added.

Anyone interested drop me an email at [email protected]

All funds genereated go towards a worthy cause.... my G40 saving for either a engine/gearbox rebuild or converting it to use a different engine.

Cheers

Alan

at least it's going to a worthy cause, what do they alter timing? I may get one in the next pay check i get *thumbs up*

The inevitable question:

Got any for an AAU?

Time for a plug from an owner of one of these chips!

They're worth every penny, I've got one on my GT and I get 35mpg with fantastic acceleration (for a GT). Makes a huge difference, well worth having!

If I get enough interest I will do a AAu chip
I have a spare ECU for them aswell
Cheers Krupa

I'd be interested, definately.

Hmm... £26 performance boost

Yep and it definantly noticeable probably alot more than you would ever see from a air filter change.

Once I've paid for driving lessons, my bumpers, my wheels, my centre caps, and possibly more painting, I will see how my finances go.

Karl.

I'd be interested in one for AAU too

hi
I'm still getting used to engine codes, but I would definitly be interested in a chip (if available) for my 1.0 engine on an L reg

Yours will be AAU then^^^^^^^^^^

I am interested, but don't trust myself with the soldering, as mines a later model with all the revisions (soldering in the ECU was one of them). If only I could get someone to fit it for me...

Karl.

Will yo be at the polo show karl-cl-coupe as I have a spare 1.0l ecu we could see if i works with your car.

Hi Alan, its Mk3_ranger off porka here. Last week you asked me wether my ECU was a K or an N model in terms of the part number. Well its a K model. Sorry its took so long its just seeing u post on here has reminded me and porka being down at the mo isnt helping.

Cheers

ace: where are you located? am def interested but have to wait for money!


[edit] just noticed it says on the sig. oops