UK-POLOS.NET - THE VW Polo Forum

Has anyone installed LED's in the footwell, if so can you guide me through.

Can i wire them from the interior light so they come on when the doors open?

thanks,

Dan

I know Marco has installed some blue footwell LED's on his GTI, drop him a PM and i'm sure he will help you out (username - menocal)

I've got some LEDs wired in for ambient lighting (not the footwells yet though) - I opted for the sidelights though, so I could have them dim-able too.

thats (pic above) exactly how i want mine

assume they'll be wired into the interior light, up through the a pillar?

anyone know how to do this?

I cover it in brief in this guide. It's pretty simple once you see it though.

http://uk-polos.net/viewtopi ... 10&t=55435

I'm looking to do the same. I'm thinking of running it off the cigarette lighter cables, to a switch in/near the glove box then to the footwells and maybe the underside of front seats.

This will be my first kind of electrical project and finding it difficult to get any information. Can someone give me advice on this? I would prefer it on a separate switch to having it on one of the interior light switches.

Cheers

I think its a pretty easy thing to do (the way im wanting to do it). I'm just wondering if it is as easy as i think it is.

I have this in my GTI. First ever mod i did haha. Never use them now really but I just took a feed from the cigarette lighter and it then goes to a switch which changes the colour and also switches them on. Will try and get a picture laters

Endi_GTI wrote:I have this in my GTI. First ever mod i did haha. Never use them now really but I just took a feed from the cigarette lighter and it then goes to a switch which changes the colour and also switches them on. Will try and get a picture laters

Thats exactly what I'm looking to do. Was it a pretty easy job? I'm also tempted to do it under the front seats and onto the rear foot wells.

Yeah very easy mate. Take the cigarette lighter out and take a feed and an earth from it. I also had it under the front seats but when i put my recaro buckets in i left it out. I used the Ikea led light strips and then cut the transformer off which took it from mains to 12v. Works a treat mate.

I used these mate and used the switch that is after the transformer. Just double check the voltage and current parameters as it looks like they have updated the set as mine differs slightly.

http://www.ikea.com/gb/en/catalog/products/00202324/

I was looking at manybe a set of these;

http://www.ebay.co.uk/itm/170924860759? ... 1436.l2649

And just wire in a switch.

Yeah man it so simple to wire up so im sure they would be fine