UK-POLOS.NET - THE VW Polo Forum

any fitted a bluemotion splitter from the 9N3 (front and rear) to a polo 9N

how easy was it and any pictures?

thanks, Jackkk

Well the front splitter blatantly isn't going to fit a 9n is it?

Ash

explain how ? Is it not just a lip that goes in place of the original black bit from the original bumper ??

The Bluemotion front splitter won't fit on a 9n, since the 9n3 is a face-lift and has a different front bumper/bonnet/wings etc. Nearly everything behind the front wheels is the same; meaning that side skirts, rear valances and roof spoilers can be fitted to either 9n or 9n3 with no problems.

Hope this helps

I assumed splitter meant just the bottom lip, and I know that the bottom lip would fit the 9N... Thanks for the help guys

You may be talking about the Votex kit for the 9n. There was no 9n bluemotion but there was a 9n3 one, so the bluemotion front lip/splitter will only fit a 9n3.

Bluemotion lip on a 9n3


Votex lip on a 9n


Looking at them together they're actually pretty similar But they aren't interchangeable between models.

Hope this helps!

K.I.T.T. wrote:Well the front splitter blatantly isn't going to fit a 9n is it?

Ash

Lollll ANGRY ASH!

can you see where the line is just below the plastics on the bluemotion 9N3? when it said "splitter" i thought it meant that that specific piece of the bumper would be able to come seperate from the whole bumper. this is why i thought that it could be possible to put it on the 9N... my mistake, thanks for the help guys