the car already has manual c/l installed so i would like it to be remotely operated. i I'm just getting this ready to fit and i am unsure on where some of the wires might go. the main one i am confused on is the one circled in red I'm reading this as both a positive and negative which doesn't make sense to me
useless instructions below
the main unit diagram
and the trigger for the c/l (confusion in red)
any help would be grand cheers graham
6n aftermarket central locking
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 6n aftermarket central locking
do the colours in that guide match up to the diagram i have as i got confused and blew the fuse when i followed a Rclick fitting guide before?
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 6n aftermarket central locking
For yours being a 6N, it should be as below
RCL wiring to PUMP wiring
RED to red/white (either of them)
BLACK to brown (either of them)
White to grey/black
White/black to grey/red
YELLOW and YELLOW/BLACK need to be tagged onto RED for +12V
ORANGE and ORANGE/BLACK are not used
RCL wiring to PUMP wiring
RED to red/white (either of them)
BLACK to brown (either of them)
White to grey/black
White/black to grey/red
YELLOW and YELLOW/BLACK need to be tagged onto RED for +12V
ORANGE and ORANGE/BLACK are not used