Page 1 of 1

9N - Removing door panels & mirrors

Posted: Sun Mar 30, 2003 3:29 pm
by mole
I decided to have a go at removing my door mirrors today in order to get them sprayed. Here is a quick how to on how to remove them, this also helps any 9N owners who want to remove their door panels for any other reason (speakers etc..)

Download the PDF file for offline reference and printing.

Also, get the reader if you don't have it already:

Image

Posted: Sun Mar 30, 2003 3:36 pm
by polo2k
just a note on removing the maual winders: there is a cover on the crank that can be pried up from the opposite end to which youi can grab thus exposing the screw
MOLE by spline do you mean torx?
MOLE nice plate on the scooby :D

Posted: Sun Mar 30, 2003 3:40 pm
by mole
Well its like the big mother I had when I was doing my suspension, 12 points I believe?

Posted: Sun Mar 30, 2003 3:50 pm
by polo2k
right well it goes by the names like milti point torx, tripple square, spline drive etc

Posted: Sat Apr 05, 2003 12:03 pm
by mole
Ok :)

Right, after thinking about it, not all of the mirror is colour coded at factory, just the main body of it. So.... Just rip the cover off! (technical terms there! ;)) No need to take the whole mirror off if you are just getting the main part sprayed.