Polo 6R - Useful Part Numbers
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
Thats a bit to much just for a roof rack and possible rust issues
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
ELSA WIN online, repair manuals, service procedures ... free
https://en.kolhosniki.ru/elsaonline
https://en.kolhosniki.ru/elsaonline
- ag69
- Silver Member
- Posts: 430
- Joined: Fri May 26, 2017 10:39 am
- Drives: 1.2TSi 77Kw 7DSG
- Location: Earth
Re: Polo 6R - Useful Part Numbers
Thanks amer6R
But "Transmission" has drop down as:
I choose 603 GP as Model and CBZB Engine
So any idea what to choose?
Here is part of my VCDS scan :
But "Transmission" has drop down as:
- PCC
- PLB
- PMX
- PWJ
- QHX
- QRG
- RCY
- RQV
I choose 603 GP as Model and CBZB Engine
So any idea what to choose?
Here is part of my VCDS scan :
Code: Select all
-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 0AM-927-769.clb
Part No SW: 0AM 300 065 N HW: 0AM 927 769 D
Component: GSG DSG AG7 431 6561
Revision: 00043014 Serial number: CU501407085037
Coding: 0000020
Shop #: WSC 63002 002 1048576
VCID: 3A2E3B83D054E5DB5C7-806E
No fault code found.
-------------------------------------------------------------------------------
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R - Useful Part Numbers
That will be a RCY
- ag69
- Silver Member
- Posts: 430
- Joined: Fri May 26, 2017 10:39 am
- Drives: 1.2TSi 77Kw 7DSG
- Location: Earth
Re: Polo 6R - Useful Part Numbers
Thanks iichel.
Is there anyway to find mapping or it is because of your sheer amount of work done on 6Rs
Is there anyway to find mapping or it is because of your sheer amount of work done on 6Rs
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R - Useful Part Numbers
It should also be on the sticker in the boot with all equipment codes
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
Can someone confirm that polo 6r shares the same wishbone bushings as mk4 golf ?
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R - Useful Part Numbers
Yes same as MK1 Audi tt
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
Thank you
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
6Q0199851AP - Lemforder
The dimension are the large bush 80 mm, the smaller bush is 36 mm
the height( of 80 mm bushing) is 40 mm, the width of smaller bushing is 32 mm
the height of the smaller bushing is 50 mm
Bushing screw to screw is ~181-182 mm
Large bushing bolt opening is fi 11 mm
Will post the dimension of OEM doge bone mount. If you can source the large bushing that is 80x40 mm you can rebuild the doge bone mount or atleast the lemforder one.
Edit: I have just replaced mine OEM mount ( its also produced by Lemforder but it has Vw stamps )
- No engine diving under hard acceleration
- No jerking feeling that car is giving self throttle dow a hill or in stop go traffic.
The dimension are the large bush 80 mm, the smaller bush is 36 mm
the height( of 80 mm bushing) is 40 mm, the width of smaller bushing is 32 mm
the height of the smaller bushing is 50 mm
Bushing screw to screw is ~181-182 mm
Large bushing bolt opening is fi 11 mm
Will post the dimension of OEM doge bone mount. If you can source the large bushing that is 80x40 mm you can rebuild the doge bone mount or atleast the lemforder one.
Edit: I have just replaced mine OEM mount ( its also produced by Lemforder but it has Vw stamps )
- No engine diving under hard acceleration
- No jerking feeling that car is giving self throttle dow a hill or in stop go traffic.
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
Just want to add if someone ever needs.
GSP outer cv joint is great quality.
Disassembled mine today, tohough it was pita. It wasnt 0 play, felt like new. After one year. ( Note add extra 90g of grease into it)
And the price is 1/2 of SKF
GSP outer cv joint is great quality.
Disassembled mine today, tohough it was pita. It wasnt 0 play, felt like new. After one year. ( Note add extra 90g of grease into it)
And the price is 1/2 of SKF
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Polo 6R - Useful Part Numbers
Anyone familair with part numbers for the brackets in yellow?
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
If i can remember correctly they can flip open, maybe the part number is hidden...
Try taking a pic of the part, and scan it with google lens maybe something comes back
Try taking a pic of the part, and scan it with google lens maybe something comes back
-
- Platinum Member
- Posts: 1148
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Polo 6R - Useful Part Numbers
If anyone needs, SNR is OEM bearing in polo 6R
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/