Page 1 of 1
Polo 6R Lowering Springs
Posted: Thu Oct 10, 2013 11:06 am
by rennieblair
Looking to get some lowering springs for my 2010 1.6 Tdi. Have looked at the following springs :
http://www.ebay.co.uk/itm/Eibach-Pro-Ki ... 35c756a800
http://www.ebay.co.uk/itm/H-R-28977-1-L ... 3a7980654f
What springs would be better and why? Or if you recommend any more?
Thanks
Re: Polo 6R Lowering Springs
Posted: Wed Oct 16, 2013 8:59 am
by dkdaz
depends on how low you want to go.
i have the VW eibachs on mine. front looks good, but the rear needs to be lower, as i have a nose down stance.
It has a decent ride, not too harsh, and corners much better.
i am considering the H&Rs myself, although i would just fit the rear springs though.
I just wish i had gone with the H&R's in the first place.
Re: Polo 6R Lowering Springs
Posted: Fri May 09, 2014 3:59 pm
by S_evans91
Which axle weight H&R springs are for the polo tdi. Thanks
Re: Polo 6R Lowering Springs
Posted: Sat May 10, 2014 11:55 am
by Joe9n3
H&R all day, firm and feels awesome but not back breaking. lowers just right, vw (eibach) ones dont lower enough front or rear imo
Re: Polo 6R Lowering Springs
Posted: Mon May 12, 2014 9:27 am
by PogoCT
I beg to differ - my Eibach from VW is 1 finger gap all round
