Page 1 of 1
Fitment And Offset Guys Get In Here
Posted: Tue Oct 15, 2013 8:06 am
by Tony Boi 92
Hey guys
Anyone who knows offset and and fitment, I need your help
Im not too clued up on fitment so please excuse me.
But im currently rolling on 16" Monzas as standard, with coilovers all the way down.
Could I fit 5x100 17" alloys but 8.5J off-set 13 on the front and 10J off-set 20 on the back?
Best regards
Cheers everyone!
Re: Fitment And Offset Guys Get In Here
Posted: Tue Oct 15, 2013 10:18 am
by noone025
8" can work, 8.5" is getting a little tricky. Very possible, but getting harder, need smaller tyres, etc.
Those offsets seem too low, I'm running 8's with a 38 offset, you could go lower if you're willing to poke / stretch.
If you're looking for a daily fitment that wont rub and you can go low, I'd recomend 8's with a 205 tyre. You can go a lot wider in the rear than the front.
How low? Are you willing to roll guards / run without arch liners? How much stretch? Will you play with the topmounts to get more camber?
Re: Fitment And Offset Guys Get In Here
Posted: Tue Oct 15, 2013 11:44 am
by R77YSJ
They won't fit, static fitment Ive run 8j et30 all round 185-35-17 on the front and 195-40-17 on the rear you can run 195's on the front all depends how low you are tho because 8 et 30 is quite a aggressive offset And 195's can rub
Re: Fitment And Offset Guys Get In Here
Posted: Tue Oct 15, 2013 4:55 pm
by Gtiandy
No idea on the front but my rears are 9J ET 15 which look like this
Inner clearance
Poke from arch
With tyre
So if yo want 10J Et 20
8mm more poke and 17mm more inwards than mine.
Hope that helps, tbh it all confuses the s**t out of me, but use
http://www.willtheyfit.com and it will show old vs new
Re: Fitment And Offset Guys Get In Here
Posted: Tue Oct 15, 2013 8:05 pm
by Tony Boi 92
So no!
That websites great having a play now
thank you to everyone that helped, much appreciated!
Andy dont your wheel rub against your arch?