Polo 1.4 TDI - starting on 2 cylinders?
Posted: Sun Apr 27, 2014 3:55 pm
Hi,
I'm looking for some advice as to exactly what this fault might be (and what the worst case scenario might be re cost to fix)...
I have a 2003 Polo 1.4 TDI that seems to start on only 2 cylinders. It runs roughly for a few miles but will, after stopping for a few minutes, start perfectly the next time and run normally. The underlying problem is clearly still present at this point though because the engine sometimes continues to idle (very slightly) roughly - something which can be difficult to pick up on unless you're looking for it .
Any advice appreciated.
Thanks.
I'm looking for some advice as to exactly what this fault might be (and what the worst case scenario might be re cost to fix)...
I have a 2003 Polo 1.4 TDI that seems to start on only 2 cylinders. It runs roughly for a few miles but will, after stopping for a few minutes, start perfectly the next time and run normally. The underlying problem is clearly still present at this point though because the engine sometimes continues to idle (very slightly) roughly - something which can be difficult to pick up on unless you're looking for it .
Any advice appreciated.
Thanks.