Page 1 of 1
How to
Posted: Wed Sep 10, 2014 10:05 am
by dantheram
disconnect certain items from the ECU.
can anyone help?
for example, how do i stop the ABS talking to the ECU, where do i unplug it? - i need to do this to check that my VCDS isnt being blocked by a faulty module, currently i can't get it to talk to anything, i just get 'No response from controller' errors
Any help on this problem would be very much appreciated, it's driving me mad!!
Dan
Re: How to
Posted: Thu Sep 11, 2014 10:06 am
by dantheram
I unpluged the ABS unit inside the engine bay (the one with the long rectanlge coupler on the side of the ABS mod)
No joy
Re: How to
Posted: Sat Sep 13, 2014 8:47 am
by 937carrera
Have you ever had it working, it might be a configuration error on the laptop you are using ?
Re: How to
Posted: Mon Sep 15, 2014 11:56 am
by dantheram
937carrera wrote:Have you ever had it working, it might be a configuration error on the laptop you are using ?
worked fine till the other day, then it just stopped.
the exact set-up has also worked on 2 other cars with no issues.
Re: How to
Posted: Mon Sep 15, 2014 2:09 pm
by 937carrera
I know it seems like a silly question, have you tried it on the other cars since it stopped working ?
I know on mine there is only one USB port I can use for it to work correctly and I would hate for you to think it's a problem with the car if it isn't.
Re: How to
Posted: Mon Sep 15, 2014 4:27 pm
by dantheram
it is highly temperamental but i tried it straight after it packed up on mine on a mk5 golf (was parked next to me so plugged in).
may be worth doing a complete reinstall though i guess.