UK-POLOS.NET - THE VW Polo Forum

guys im interested in buy the 3SDM 0.05 18x9.5J ET35 5x100

my car is vw polo gti 6r on a 2013 will it fit as i dont want to do any mods apart from lowering , thanks

link is here; http://www.ebay.co.uk/itm/3SDM-0-05-18x ... 2edbb40b7d

They wont fit unfortunately, especially on the rear as it will be in contact with the arch. They weigh an absolute ton aswell

This one is running 8,5x18 ET35

[quote="Mart!n-GTI-DK"]This one is running 8,5x18 ET35

[/quote

Are the tryes and wheels inside the arches

that polo looks really good on those wheels
Looks like its running it a lot of stretch, and the wheel probably sticks out a bit. Im running 7.5j et38 215/35/18 and its just about flush at the front

*double post*

saty wrote:that polo looks really good on those wheels
Looks like its running it a lot of stretch, and the wheel probably sticks out a bit. Im running 7.5j et38 215/35/18 and its just about flush at the front

Wheels do my head in and specs

17 will be ok with some h&r lowering springs or will be better fit

Here's a few more pics of the Polo:





The front ones sit flush. The rear ones stick out a little bit.

Tires are: 205/35-18 so a bit of stretch.

Polo looks stunning, must be a nightmare to drive

Longman wrote:

saty wrote:that polo looks really good on those wheels
Looks like its running it a lot of stretch, and the wheel probably sticks out a bit. Im running 7.5j et38 215/35/18 and its just about flush at the front

Wheels do my head in and specs

17 will be ok with some h&r lowering springs or will be better fit

Yeah it should be okay, which 17" wheels are you looking at?

Mart!n-GTI-DK wrote:Here's a few more pics of the Polo:





The front ones sit flush. The rear ones stick out a little bit.

Tires are: 205/35-18 so a bit of stretch.

Such a tease

Dammnnn!!!!!!! wish i had them on , ok also another thinng, im think of lowering the car BUT it will be used as a daily car i.e passengers any help ???? on what size?