Page 1 of 1

Looking for new wheels *again*

Posted: Mon Jul 19, 2004 11:33 am
by Clawz
Hi all,

I'm on the hunt for some new alloy wheels again but never really figured out what wheel / tyre sizes would fit on the car without having to modify the bodywork in any way :/

I can get away with bigger wheels and things on my insurance without it being considered a modification...

I think there's currently a set of 14" wheels on there atm

Also, is it really going to look like a tractor if I don't lower the suspension immediately??

thanx all!

Posted: Tue Jul 20, 2004 8:10 pm
by carmadaaron
hello,
ive got 18" Kahn RSC with 215/35/18 tyres and it doesnt catch at all. its still got plenty of room for lowering, around -40mm.

hope this helps.
:D

Posted: Tue Jul 20, 2004 8:14 pm
by Clawz
You don't have any problems with clearance at full lock??

Posted: Tue Jul 20, 2004 8:16 pm
by carmadaaron
absolutely NO problems! :D

Posted: Tue Jul 20, 2004 8:19 pm
by carmadaaron
18s look wicked, what engine size u got?

Posted: Tue Jul 20, 2004 8:19 pm
by Clawz
got any pics?

Posted: Tue Jul 20, 2004 8:24 pm
by carmadaaron
coming very soon!

plenty of space under arches!

Posted: Thu Jul 22, 2004 9:35 pm
by SiDaBa
but for a 1.2 you have to admit that acceleration was not quite what it used to be, even i notice that with 16s

Posted: Fri Jul 23, 2004 7:21 pm
by carmadaaron
that is very true. but my 1.2 12v aint so fast to begin with.
im after looks as i need the cheap insurance. 8)

Posted: Mon Jul 26, 2004 6:54 pm
by Clawz
Any chance of those pics??

Posted: Fri Jul 30, 2004 1:03 pm
by carmadaaron
ill post them up over the weekend :wink: