iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
What do we have here?
.... ...
So I went shopping:
And decapitated this lever and manual Polo 6R0 lever
Do some frankensteining....
It's not perfect - yet.
The 5NB lever has the D/S on the same LED. The 6R0/6C0 lever works differently.
Pin layout 6R0, it has one common positive and switched negatives, it seems:
T10/
1 permanent GND
2 +-
3 P
4 R
5 N
6 D
7 S
8 Common + (+15 with DRL, 58d with sidelights and low beam)
9 vacant
10 vacant
wiring --> viewtopic.php?p=589334#p589334
.... ...
So I went shopping:
And decapitated this lever and manual Polo 6R0 lever
Do some frankensteining....
It's not perfect - yet.
The 5NB lever has the D/S on the same LED. The 6R0/6C0 lever works differently.
Pin layout 6R0, it has one common positive and switched negatives, it seems:
T10/
1 permanent GND
2 +-
3 P
4 R
5 N
6 D
7 S
8 Common + (+15 with DRL, 58d with sidelights and low beam)
9 vacant
10 vacant
wiring --> viewtopic.php?p=589334#p589334
- ag69
- Silver Member
- Posts: 429
- Joined: Fri May 26, 2017 10:39 am
- Drives: 1.2TSi 77Kw 7DSG
- Location: Earth
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
very nice iichel.
With all these mods, I am short of superlatives to express you!!!
With all these mods, I am short of superlatives to express you!!!
-
- Silver Member
- Posts: 260
- Joined: Sat May 15, 2021 6:23 am
- Drives: Polo 6c MY2016 1.0 75Hp
- Location: Greece
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Wow, excellent job. I admire your will to create.
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Thank you all. The show goes on
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Great retrofit! You are doing a very good job!
I think I will miss my old Scirocco's gauges to check oil temp easier!
I think I will miss my old Scirocco's gauges to check oil temp easier!
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Normally, I always have the digital speedo in my cluster. The oil temperature is only 1 click down, if you need it.
-
- Platinum Member
- Posts: 1104
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Are you still running a dpf pressure sensor ?
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Yes, I have an intact DPF on my car.
-
- Platinum Member
- Posts: 1104
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Yes, I saw the pictures you posted. You've relocated it. I think its a really nice upgrade.
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
-
- Platinum Member
- Posts: 1104
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
No, i meant on the sensor lines that go to the dpf. I presume you routed them on top side. Since its not visible on photo. That why i thought you maybe turned that feature off.
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Ah yes, now I understand. The DPF is completely intact and working as intended. All sensors present.
----
How I got by the issue of the D/S indicator in the lever head not being illuminated.
to illuminate the D/S in S mode. the dsg selector mechanism has some kind of error detection on the LED.
if I connect both one or wires to the D/S LED (T10/6) it will go out after a few seconds. I don't think there is a DSG bit/byte to disable light diagnostics on the dsg lever
----
How I got by the issue of the D/S indicator in the lever head not being illuminated.
to illuminate the D/S in S mode. the dsg selector mechanism has some kind of error detection on the LED.
if I connect both one or wires to the D/S LED (T10/6) it will go out after a few seconds. I don't think there is a DSG bit/byte to disable light diagnostics on the dsg lever
-
- Silver Member
- Posts: 493
- Joined: Wed Dec 07, 2016 8:34 pm
- Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
- Location: Foothills of Nilgiris, India
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
iichel, thanks a lot for sharing both the problem and solution associated with new led dsg lever on 6R. Even I have ordered same lever, yet to reach me (RUS--IND). I intend to install new lever with 6C base( more lights ).iichel wrote: ↑Fri Jan 14, 2022 5:39 pm
How I got by the issue of the D/S indicator in the lever head not being illuminated.
to illuminate the D/S in S mode. the dsg selector mechanism has some kind of error detection on the LED.
if I connect both one or wires to the D/S LED (T10/6) it will go out after a few seconds. I don't think there is a DSG bit/byte to disable light diagnostics on the dsg lever
I see you are using a 12v 1ch relay with optocoupler isolated board that allows an electrical signal to be transmitted between two isolated circuits(for D&S) sharing single SMD, am I right? I am curious to know how it works.
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Yes you are completely correct