Retrofitting Genuine Xenon Headlights on Polo 6C
Posted: Tue Mar 31, 2015 3:47 pm
Hi Everyone,
Just after some info really, Has anyone attempted this retrofit? My new polo SE is due at the dealers soon and I have managed to get my hands on a set of
genuine Bi Xenon headlights for a really good price. I know I need a set of 10 to 14 pin adapters from car systems ( I have seen ciclo diagram ) I also have vcds so can do the coding.
The BCM I believe is 6C0 937 089 on all the 6C's so should be adequate for xenon's? The DRL's are in the bumper so would they need to be wired in
the 14 pin connector? Any help would be greatly appreciated as if its not possible I don't want to waste my time.
If Possible I would be happy to do a tutorial if anyone else was thinking of doing the same. Cheers.
Just after some info really, Has anyone attempted this retrofit? My new polo SE is due at the dealers soon and I have managed to get my hands on a set of
genuine Bi Xenon headlights for a really good price. I know I need a set of 10 to 14 pin adapters from car systems ( I have seen ciclo diagram ) I also have vcds so can do the coding.
The BCM I believe is 6C0 937 089 on all the 6C's so should be adequate for xenon's? The DRL's are in the bumper so would they need to be wired in
the 14 pin connector? Any help would be greatly appreciated as if its not possible I don't want to waste my time.
If Possible I would be happy to do a tutorial if anyone else was thinking of doing the same. Cheers.