Water Temp Warning Light worries
Posted: Mon Jul 26, 2004 9:27 am
This is going to sound somewhat like Karls oil warning light post, and they are most likely the same clocks as he tried as I bought them off him.
I fitted them the weekend and all is going smoothly but then I realise that the Rev counter is miles off (sits at 0 whilst idling and doesn't move until about 2500-3000 revs) and then today when I start her up, the water light won't go out. Just keeps flashing.
I checked all the water and pipes and stuff and they are all just fine and dandy so I put it down to one of these weird clock swap thingys as I had to get to work.
Now that I'm at work and the engine has warmed up, I can't get it keep flashing, it just goes off as normal!!
Don't worry Karl, I'm not blaming you buddy, but it seems that there is more to swapping these clocks over than first appears
I fitted them the weekend and all is going smoothly but then I realise that the Rev counter is miles off (sits at 0 whilst idling and doesn't move until about 2500-3000 revs) and then today when I start her up, the water light won't go out. Just keeps flashing.
I checked all the water and pipes and stuff and they are all just fine and dandy so I put it down to one of these weird clock swap thingys as I had to get to work.
Now that I'm at work and the engine has warmed up, I can't get it keep flashing, it just goes off as normal!!
Don't worry Karl, I'm not blaming you buddy, but it seems that there is more to swapping these clocks over than first appears
Can't say I experienced problems with the rev counter on those clocks though. My only problem was the oil pressure light and buzzer.