Page 1 of 1
Spacers & Springs
Posted: Tue Oct 25, 2016 2:38 pm
by Clint
I'm planning on putting 20mm back and 15mm front spacers on a 6C, are other people running similar spacers, especially anyone that is running with 35/55mm springs - any issues?
Other than fitting them, are there other things I should consider such as geting the wheels realigned, etc?
Cheers for the advice!
Re: Spacers & Springs
Posted: Wed Oct 26, 2016 7:00 pm
by Spitsy
I'm currently using 15mm spacers on front and rear with 17x7J ET42 205/40/r17 without any problems. 20mm wouldn't be a problem either. It really depends on the rims you are using, which offset and width and stuff. However I'm a little bit higher then you. 35/45mm with Bilstein B14 coilovers. I personally think there is no need to re-align your wheels.
Hope this helps you a little bit
Re: Spacers & Springs
Posted: Thu Oct 27, 2016 6:23 pm
by Bigfish99
Thats with the 30/45 HR Springs in.... 10mm spacers front and 15mm rear!
No issues.... never got them realigned... didnt feel there was any need too runs perfect!
Re: Spacers & Springs
Posted: Mon Jan 23, 2017 8:37 am
by asafzabari
Bigfish99 wrote:
Thats with the 30/45 HR Springs in.... 10mm spacers front and 15mm rear!
No issues.... never got them realigned... didnt feel there was any need too runs perfect!
Did you had to replace the bolts on all wheels? or just the rear ?
Thanks.
