Page 1 of 1

Help Please DRL's from Headlight to lower aux fog assembly

Posted: Wed Feb 08, 2017 9:33 pm
by Paul R
Could someone help me please ?

We own a 62 plate 6R polo with DRL's fitted to the main head lamp unit, and I would like to fit an aftermarket / OEM fog lamp with DRL's.

The lamp is available for my model car, but what I need to know is what wire do I pull off from the headlamp unit to power up a DRL bulb fitted into the replacement fog lamp.
The car came with factory fog lamps with turn light,

The problem I get is when I go over speed humps, on coming traffic think I'm flashing them to proceed, and it is leading to so much frustration, I know it is just as easy to use the side light / main light switch, but I prefer to jump in the car and drive and turn on the main lights when it is dark, not worrying about turning a switch to cancel the drl's

So if there is help out there it would be appreciated

Cheers Paul

Re: Help Please DRL's from Headlight to lower aux fog assembly

Posted: Sun Mar 05, 2017 12:23 pm
by ciclo
You do not have to modify any wire from the headlights at all.

You have to install new wires from Light Switch and/or BCM. It depends on BCM reference number that is installed in your 6R.

It may be necessary to install a new light switch (with a different reference).

VCDS autoscan?