Page 1 of 2
Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp instal
Posted: Wed Aug 16, 2017 4:30 pm
by sivasai01
Hi,
I just bought a new fog lamp kit which comes with wiring harness, fog lamps and grill for my polo sedan 2014.As my car is basic trendline car which has not come with the factory fitting.I have a 20 pin euro switch.And I heard that pin #8 is used for the front fog lamp.But unfortunately when I had a look in to the switch the pin # 8 #9 are already occupied with some wires I'm not sure what wires they are .I only have few empty pins in the switch they are #3,#5,#6,#7,#11,#12.So,I just need a suggestion what would be alternative pins to connect the front fog lights. Please try to reply back As quick as possible.
Thanks in advance.
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Fri Aug 18, 2017 5:25 am
by ciclo
Hello welcome.
Light switch connector is 17-pin.
Electrical connection:
From PIN8 (mandatory) T17/8 ---to--- 15Amp fuse ---to--- both fog lamps, and ground logically.
But there are two ways to connect the fog lights, one of them can provide the static cornering light function through the same bulbs, but depends on the equipment from the factory (BCM model, ESP from factory) and wiring you bought.
Please, show us the wiring you bought (link to?, or pic), also your T20 conector with the color wires (both sides), plus one picture of fusebox (to check the power supply), and please, as quick as possible....
Do you have VCDS? if so, Autoscan (asap)
Excuse me for the delay in answering ...
(you know I'm kidding)
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Sun Aug 27, 2017 7:16 pm
by sivasai01
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Sun Aug 27, 2017 7:28 pm
by iichel
those look more like connectors for the DRL than for the foglights.
do you have a vcds?
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 9:03 am
by ciclo
It seems that this Polo Sedan IND has a pre-installation for front fog lamps. From the light switch to the fuse box.
Please remove fuse 54 and take a close photo from this slot.
The connectors (plugs/sockets) you show do not belong to the front fog lights in any case.
Tips
1. The Light switch with the correct positions is very cheap. Aliexpress (10-15$). Buy it.
2. You should use the rear fog lamp when the wheather conditions require it. At least to safeguard the lives of others.
3. You will not have my help if you do not do an original installation.
Forget about inventing exotic things.
Waiting for the slot picture. (54 fuse)
ciclo wrote: ↑Fri Aug 18, 2017 5:25 am
Please, show us the wiring you bought...
And front fog lamps.
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 9:51 am
by sivasai01
iichel wrote:those look more like connectors for the DRL than for the foglights.
do you have a vcds?
No I don't have VCDS.when I have checked the other cars fog lamp wiring it has white and brown wires in it.And the socket which are shown in the picture are also having white and brown wires.
Sent from my Le X526 using Tapatalk
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 10:56 am
by ciclo
The front fog lights wires for your 6R must be yellow/white, plus brown.
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 11:23 am
by sivasai01
ciclo wrote:It seems that this Polo Sedan IND has a pre-installation for front fog lamps. From the light switch to the fuse box.
Please remove fuse 54 and take a close photo from this slot.
The connectors (plugs/sockets) you show do not belong to the front fog lights in any case.
Tips
1. The Light switch with the correct positions is very cheap. Aliexpress (10-15$). Buy it.
2. You should use the rear fog lamp when the wheather conditions require it. At least to safeguard the lives of others.
3. You will not have my help if you do not do an original installation.
Forget about inventing exotic things. [emoji38]
Waiting for the slot picture. (54 fuse)
ciclo wrote: ↑Fri Aug 18, 2017 5:25 am
Please, show us the wiring you bought...
And front fog lamps.
Hi
Thank you so much for your reply.i have tried to take few pictures with the fuse removes from the position #54. I request you to kindly check it.
I have another information that when I have checked the fog light wiring of the vehicles which are factory fitted it's in brown and white colour and the socket which is lying near my head light with a waterproof cap also has white and brown colour wires in it.
Sent from my Le X526 using Tapatalk
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 11:29 am
by sivasai01
I mean to say that the plug is meant for fog lamp wiring.But as I car is basic trendline model I'm thinking they might has disconnected wiring near to headlights and made it dummy with water proof socket instead of taking them till the bumper.what I think is if be take a wiring with Hb4 socket at one end and connect it directly to this socket.
Thank you in advance
Sent from my Le X526 using Tapatalk
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 4:23 pm
by ciclo
Install the light switch with the silvered knob.
Install the fuse.
Turn on the ignition switch without starting the engine.
Remove the waterproof socket you mean.
With a multimeter or test lamp look for 12
and 0 volts in that socket, by rotating the light switch knob to the front fog light position,
and anyother position.
I repeat
: 12 and 0 volts.
To be sure that the wires/sockets are dedicated to the front fog lights, they could have 12v and not be the front fog lights electrical installation.
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 5:46 pm
by sivasai01
In which position number I have to install the fuse and how many Amp fuse I have to install.After that I need to check the voltage with voltmeter.if it's 12v with front fog lamps position ON then we can use that waterproof socket is that correct.
Sent from my Le X526 using Tapatalk
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Aug 28, 2017 6:11 pm
by ciclo
Fuse 54.
Read my previous message again, but pay attention now.
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Thu Sep 07, 2017 7:24 pm
by antardaksh04
sivasai01 wrote: ↑Mon Aug 28, 2017 11:29 am
I mean to say that the plug is meant for fog lamp wiring.But as I car is basic trendline model I'm thinking they might has disconnected wiring near to headlights and made it dummy with water proof socket instead of taking them till the bumper.what I think is if be take a wiring with Hb4 socket at one end and connect it directly to this socket.
Thank you in advance
Sent from my Le X526 using Tapatalk
Hi,
"dummy with water proof socket instead of taking them till the bumper."
Do you have dual tone horn in your car, if not then the socket you are talking about is for the second horn. Please don't connect this to fog light. I had shared details about the same here. You can look at the picture posted by me, it looks similar to the one shared by you (socket with waterproof plug).
http://www.team-bhp.com/forum/indian-ca ... ost4020801
Regards.
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Sep 11, 2017 8:30 pm
by sivasai01
Hi,
My dear friend.I have only single horn in my car.But the dummy sockets are present near by headlight on both left and right sides.And the colour of the wires are white and brown.I thought if I can use the extension wires
6RF 971 651
Screenshot_2017-09-12-01-06-52.jpg
.which has one end for connecting fog lamp and other end for connecting to the dummy socket.I have tried connecting this wires and installed it.Fogs worked for few minutes and stopped working may be they are cheaper one Chinese.So I'm just thinking to install some branded one.what do you suggest.
Sent from my Le X526 using Tapatalk
Re: Fog lamp installions pin # 8,#9.are already occupied by someother pins what are the alternative pins for fog lamp in
Posted: Mon Sep 11, 2017 8:35 pm
by sivasai01