Page 1 of 1
One touch on wrong side
Posted: Wed Sep 27, 2017 2:34 pm
by piglet14
Think this might have been discussed before,
Window '1-touch' on N/S but not drivers.
Fault?
Re: One touch on wrong side
Posted: Fri Sep 29, 2017 11:37 am
by alexperkins
Try cleaning (or replacing) the switch. The switches have a habit of corroding and not behaving
Re: One touch on wrong side
Posted: Sat Sep 30, 2017 6:36 pm
by piglet14
Switches work fine for press & hold though?
Re: One touch on wrong side
Posted: Sat Sep 30, 2017 7:06 pm
by alexperkins
Tried resetting by holding down till open for an additional 5 secs and close and hold for 5 secs?
Re: One touch on wrong side
Posted: Tue Oct 03, 2017 10:27 am
by piglet14
Didn't work for me, am I sposed to do anything with the ignition during this process?
Should it have 1 touch on both sides or driver only?
Re: One touch on wrong side
Posted: Tue Oct 03, 2017 10:31 am
by alexperkins
Should have 1 touch both sides. Yes ignition needs to be on
Re: One touch on wrong side
Posted: Thu Oct 05, 2017 4:08 pm
by piglet14
Given up, reprogramming didn't work and I'm not stripping it all down for that.
I'm sure I can struggle on without 1 touch drivers window.