UK-POLOS.NET - THE VW Polo Forum

Hi All,
As a newbie I've been struggling with figuring out eactly what spec I've got on my new SE 95 (standard spec + parking sensors). After spending considerable time studying the manual, I still have some confusion. Here's an example:-

The indicator switch. The photos in the manual show the switch with either nil, one or three controls attached
The one button option is for driver assist (page33)
The 3 button option is for cruise control (p135) or speed limiter (p137)
The basic switch (no buttons) refers to the standard operation (P92/93/89)

However my switch has TWO buttons, and nowhere is this option referred to as far as I can see. (small switch on top plus the one on the end)
When I queried this with the dealer he thought I had cruise control! (which would have been nice, but wasn't ordered) And indeed, when I moved the top switch to the left it brought up the cruise control icon on screen. I could not however lock it to the current speed.

Exactly what''s going on here? It seems that I almost but not quite have cruise control?!

Does anyone have the same layout as me and figured it out?

I don't have my Polo yet but, I would assume it's the speed limiter as the SE definitely has that as standard... from my experience with other manufacturers, the speed limiter and cruise control symbol are very similar.

I'd maybe set it again and then try to excess that speed... although don't press the accelerator down too much as that will override the speed limiter (again in my experience from other manufacturers)

Ok I'll do further research on the speed limiter thing. Didn't realise it was standard, I'm even more confused now.