Hey guys...
The bulb in the cig lighter seems to be dead. Car has done 21.700
Miles, so a bit early.
Well i just cant figure out how to remove the socket.
Any guides or help? I cant be the only one to encounter this issue.
Sent from my iPhone using Tapatalk
Cigarette lighter bulb
- iichel
- Bling Bling Diamond Member
- Posts: 6375
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Cigarette lighter bulb
Well I guess you'll either have to replace it or live with a broken bulb.
For removal, VW should have a special tool for it. Otherwise, you'll have to take out the centre console (armrest, handbrake, gear lever, climatronic cover, upper center console, lower center console) to remove it.
For removal, VW should have a special tool for it. Otherwise, you'll have to take out the centre console (armrest, handbrake, gear lever, climatronic cover, upper center console, lower center console) to remove it.
Re: Cigarette lighter bulb
I guess the special tool is the way forward.iichel wrote:Well I guess you'll either have to replace it or live with a broken bulb.
For removal, VW should have a special tool for it. Otherwise, you'll have to take out the centre console (armrest, handbrake, gear lever, climatronic cover, upper center console, lower center console) to remove it.
Crazy how complicated it is to change such a tiny bulb.
Sent from my iPhone using Tapatalk
-
- Gold Member
- Posts: 859
- Joined: Wed Apr 02, 2014 4:01 pm
- Drives: 1.2TSI 105HP DSG7
- Location: Malaysia
Re: Cigarette lighter bulb
good question. anyway, anyone knows the size or the exact specifications for the bulb? it looks so small that i cant find it in most shops around my area
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Silver Member
- Posts: 461
- Joined: Wed Jun 18, 2014 6:58 am
- Drives: Blue GT
- Location: Denmark
-
- Platinum Member
- Posts: 1118
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Cigarette lighter bulb
Guys,
just to add today i used a large binder clip, take out the skinny metal springs from one binder clamp.
use silver part
Insert it in the cigarete lighter in the groove on the right and left, and then just put your key blade in the middle so the two metal pieces spread out a easily pull up. no need for force. Then remove the connector from the lighter.
To remove the right ring use a small flat head screwdriver and insert it in the clips they are at 12 and 6 o'clock. Work one clip then lift a bit, then second clip lift, then first clip etc .... no need for force.
1.2w bulb
just to add today i used a large binder clip, take out the skinny metal springs from one binder clamp.
use silver part
Insert it in the cigarete lighter in the groove on the right and left, and then just put your key blade in the middle so the two metal pieces spread out a easily pull up. no need for force. Then remove the connector from the lighter.
To remove the right ring use a small flat head screwdriver and insert it in the clips they are at 12 and 6 o'clock. Work one clip then lift a bit, then second clip lift, then first clip etc .... no need for force.
1.2w bulb