Page 1 of 1

VW Polo 6C Upgrade HALOGEN to FULL LED

Posted: Tue Nov 27, 2018 1:04 am
by zakelijk19
Hello everyone,

I bought an adapter from halagon to full led

- My question is about the middle red cable, it says +12v and the seller told me i need to put it in the fuse box. Why is this because another friend of me has the adapter too, but he hasnt an cable in the middle, just the 2 adapters.
- Another friend of me told me i need to connect the red cable to my fog lights so the DRL of my headlights will be dimming when i switch to citlight or lowbeam.
- Will this also be so when i connect it to the fuse box or do I have two options with two different solutions?

Hope someone can clear this!

Re: VW Polo 6C Upgrade HALOGEN to FULL LED

Posted: Tue Nov 27, 2018 10:10 am
by RUM4MO
Well, looking at the picture of this conversion or adaptor kit, there is a red lead appearing in both the connectors presumably that plug into the new "as would be fitted at factory" 6C Polo LED headlamp clusters.

So, do the other people you know with this Carsystems supplied conversion/adaptor kit not have a red lead in that position on each connector that plugs into the new LED headlamp clusters?

Edit:- I checked on the Kufatech website but they don't seem to provide a kit for this upgrade.