ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

A section of the forum for members to show off their non-polo vehicles.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Mon Jun 22, 2020 5:37 am

Thanks iichel.
In case I decide to sell the 6R I will let you know. :wink:

My other cars are untouchable for at least 4 years, except that:
- The Touareg lacks the trailer hitch, but it's something I'm not worried about right now.
- The T-Cross 1.5 TSI 150 EVO is full equipment, but 'm still waiting to receive it in August, it will be a MY 2021.

One month ago, I was very close to buying a Golf 7.5 R-line Red (beautiful), it had exactly everything I wanted. It is still possible.

Perhaps I can convert the parking lot into a national flag of Golf 7.5 :)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Sat Jun 27, 2020 11:50 am

(BSD)

8U0959845

Image

Image

Image

I wonder why the part that fits on the door is plastic ... and not rubber like the corrugated tube ... (f hell)

Yesterday I broke the top fastening tab on the passenger door side, I took a lot of care and time to remove it, but it wasn't enough. :lol:
I have already ordered 2 new parts at my VW dealer (8€ each).

I think that without removing other parts of the door it is one of the most difficult parts to remove that I have found in my life. :mrgreen:


---

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Sun Jun 28, 2020 11:10 am

Discover Media MIB2 STD (NAV, DAB+, SDS, etc). Parts.

Image

Image

Image

Image

Image

Image

Image

Image

Image

I will try to activate all possible functions for my wife's Golf, currently with Composition Media from factory.



This is my current Composition Media unit:
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:| 5G0-035-MIB-STD2.clb
Part No SW: 3Q0 035 824 C HW: 3Q0 035 824 C
Component: MU-S--ER 724 0890
Serial number:
Coding: 02731000FF0000005111000100080A001F0500D40120010003
Shop #: WSC 00028 028 00068
ASAM Dataset: EV_MUStd4CDELP 001001
ROD: EV_MUStd4CDELP_VW37.rod
VCID: 2D07F4C8BD96D503C84-8078

Operating And Display Unit 1:
Subsystem 1 - Part No SW: 5G6 919 605 A HW: 5G6 919 605 A
Component: ABT_Std-2 H52 8130
Serial number: VWZ6ZJV2140047

No fault code found.

-------------------------------------------------------------------------------


Installed codes---------- Factory

00050000 Bluetooth
00030000 USB
00060100 Vehicle data interface
00060300 Mirror Link
00060800 Apple CarPlay
00060900 Google Android Auto

Supported codes----------

00050000 Bluetooth
00030000 USB
00060100 Vehicle data interface
00060300 Mirror Link
00060800 Apple CarPlay
00060900 Google Android Auto
+
00040100 Navigation
00060200 Infotaiment Control
00060b00 ?
00070100 SDS (Speech Dialogue System - Voice Control)
00070400 Electronic amplifier for driver

Image
💩


---

benzinkopf
Gold Member
Posts: 842
Joined: Wed Apr 02, 2014 4:01 pm
Drives: 1.2TSI 105HP DSG7
Location: Malaysia

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by benzinkopf » Sun Jun 28, 2020 12:24 pm

how i wish this one fit “easily” in our old 6r polo

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Sun Jun 28, 2020 6:31 pm

Well, you have the option to install Discover Media for PQ25, its operation is exactly the same... you already know who you have to talk to to get it. 8)

This DM will also be installed and put into operation easily :lol: , but first I want to check the levels of commitment regarding the contamination of our planet in these matters. These parts shown are new manufactured by VW or with permission from VW. :)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Sun Jun 28, 2020 8:24 pm

Image

exantas
Bronze Member
Posts: 112
Joined: Sun Jan 06, 2019 5:14 pm
Drives: Skoda Fabia 5J 1.2 TSI
Location: Iceland / Greece

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by exantas » Tue Jun 30, 2020 2:59 am

Nice upgrade, you keep the knobes and you have have almost same functionality like discovery Pro.

What about component protection? Will VW dealer will fix this for you?

Sent from my Mi Note 10 Pro using Tapatalk


User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Tue Jun 30, 2020 6:15 pm

Yes, in the case of my wife's Golf I like that it has the knobs. 8)

The CP will be removed at my VW dealer,
or through an Online cOnNeCtIoN.

Image


---

Agbogbloshie :wink:

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5621
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Tue Jul 07, 2020 6:05 am

Hello to all the followers of this thread.

wE aRe dOiNg a deep study about the BCMs for Golf MK7.5 and its retrofitting, we still have to check some small details through our methods... :lol:

You must keep the following ...
1) apart from transferring the coding/adaptations, remove CP, IMMO... the BCM must be parameterized with a Dataset 📁 for the VW model where it is installed.
Example: in case you have retrofitted a new/used BCM B, M, M+, H, H+, from another VW / AU / SE / SK model -donor car-, and there are things that may not work properly on your VW model.

And by other side...
2) keep in mind that the manufacturing dates for parts are very important for full compatibility, even for the same model (G7.5). The "MODEL YEAR"
Example: Your retrofitted Light Assist mirror -Address 20- works erratically due to non-compatibility between the BCM Dataset (model year) and mirror (model year).

Some of the retrofitted units must be parameterized (Dataset) according to the car model in which they are installed in order for them to work correctly, being possible that the diagnosis with some diagnostic tools may be correct (no fault code found) but the unit may not function properly if it is not correctly parameterized.

---

I'm also doing a phisic small study about the G7.5 fuse box (supply bars +30 and other signals, +15, etc ...).
For this small study I bought a used G7.5 fuse box on eBay, personally I consider it very important to make retrofits in a simple and especially clean way, avoiding wired fuses that are held by a single leg...



---

EM, a million thanks. 8)

2:39 💗

Post Reply