UK-POLOS.NET - THE VW Polo Forum

Hi there guys,

I have been offered to fit an Eibach Pro-Kit springs specially developed for the 1.0TSI Polo 2019. This kit has less of a drop in comparison to the Sportline kit. The drop of this one is 1 inch at the front and 1.2inches rear. The springs are progressive (soft on little bumps and hard when pushed more). According to the supplier I would not need to change the shock absorbers with this kit and not much of the comfort will be affected. I would like to do this mod as I have noticed that the Polo stands quite high (I have measured an inch higher then the Golf mk6) and this springs will put it at the "right" height while still being not too low for a daily use.

What are your opinions about this mod. Pros and Cons? Would you do it on your Polo or not?

Here is a picture how my Polo sits right now (for me it is too high)

Sounds good to me if that is what you want to do, it is your car and Eibach make quality stuff, esp if they are progressive so won't make the ride too hard for you (they will make it a bit harder though but I doubt they will be bone shattering) and should make it corner a bit flatter as well.