Page 1 of 1
Active info display
Posted: Tue Mar 10, 2020 7:37 am
by rm55mcc
Does any one no of you can display short term mpg on active info display? Only seems to show long term???
Thanks
Sent from my iPhone using Tapatalk
Re: Active info display
Posted: Tue Mar 10, 2020 8:10 am
by monkeyhanger
rm55mcc wrote: Tue Mar 10, 2020 7:37 am
Does any one no of you can display short term mpg on active info display? Only seems to show long term???
Thanks
Sent from my iPhone using Tapatalk
Press the OK button on the steering wheel to cycle between "this journey", "long term" and "since fill up".
Re: Active info display
Posted: Tue Mar 10, 2020 8:14 am
by POLO Clive
If it's the same as the previous Polo, press the OK button to toggle between
long term,
since refuel, and
since start.
***EDIT*** Or more likely as monkeyhanger said as I was posting this
Re: Active info display
Posted: Thu Mar 12, 2020 6:53 am
by rm55mcc
Sorted thanks [emoji1360]
Sent from my iPhone using Tapatalk
Re: Active info display
Posted: Thu Mar 12, 2020 8:30 pm
by Boxerboy
I've adjusted the alternative screen views 2 and 3, but every time I select parameters to display on the LH and RH dials it never saves my selection.
I can see that the default View 1 is preset, but expected View 2 and View 3 to be available for 2 drivers to show their choices.
Seems View 2 and View 3 are alse preset. But not to what I want.
Seems odd. Or am I missing a SAVE button somewhere.
Honest. I've read the manual and spent time poking the dashboard many times.
Re: Active info display
Posted: Fri Mar 13, 2020 11:00 am
by Dark_cze
Boxerboy wrote: Thu Mar 12, 2020 8:30 pm
I've adjusted the alternative screen views 2 and 3, but every time I select parameters to display on the LH and RH dials it never saves my selection.
I can see that the default View 1 is preset, but expected View 2 and View 3 to be available for 2 drivers to show their choices.
Seems View 2 and View 3 are alse preset. But not to what I want.
Seems odd. Or am I missing a SAVE button somewhere.
Honest. I've read the manual and spent time poking the dashboard many times.
I might remember it wrong since I setup my dial more than year ago.
There was auto/classic/view1/view2/view3 buttons. Auto and classic was preset and no way to change them and views1/2/3 whould be user presets. I changed view 1 to whatever I liked most and than pressed media or app connect button to go back to screen I ussualy use. I don't think there is save button.
Re: Active info display
Posted: Tue Mar 24, 2020 6:02 pm
by Teee
Hold down on the view 1 ,2 or 3 when you set your Desired display setting it will turn yellow and save view 1 ,2 & 3
Re: Active info display
Posted: Tue Mar 24, 2020 8:51 pm
by OomStu_ZA
Teee wrote: Tue Mar 24, 2020 6:02 pm
Hold down on the view 1 ,2 or 3 when you set your Desired display setting it will turn yellow and save view 1 ,2 & 3
Ahhhh, thanks for that tip will try it once we out of lockdown.
Interestingly if you have no NAV from facotry there only 2 additional views for the AID, not 3, but makes sense to me all the same.