The mechanical part is ok but I've encountered issues while coding the ABS with VCDS.
Code: Select all
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP90.clb
Part No SW: 6C0 907 379 K HW: 6R0 907 379 BA
Component: ESP9.0i H03 0004
Serial number: 08503816150928
Coding: 21DD2885492533C40914106F0052841492CC90080005CB098F00
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_Brake1ES9P0iBOSCHPQ26 100020
ROD: N/A
VCID: 377C13408E4D85FE7B-8063
No ASAM data for: "EV_Brake1ES9P0iBOSCHPQ26" (VW26)
No fault code found.
I was trying to use the S1 values for byte 2 and 15 but the code is rejected
21 DD 28 85 49 25 33 C4 09 14 10 6F 00 52 84 14 92 CC 90 08 00 05 CB 09 8F 00 (mine)
36 DF 70 8B 8D 28 33 C4 49 18 30 6E 00 57 6C 0E B1 CC 92 0C 00 13 E2 09 0F 00 (S1)
I've not understood why I cannot reuse these 2 values on my coding (70 inverted is 0E so this should be ok)
Thanks in advance
S1 ABS Scan
Code: Select all
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6C0 907 379 S HW: 6R0 907 379 BA
Component: ESP9.0i H04 0006
Serial number: 08503318161103
Coding: 36DF708B8D2833C44918306E00576C0EB1CC920C0013E2090F00
Shop #: WSC 00046 412 00000
ASAM Dataset: EV_Brake1ESP90iBOSCHPQ26 100020
ROD: EV_Brake1ESP90iBOSCHPQ26.rod
VCID: 3F8D53C6A6C768BA97-806A
No fault code found.