Tyre wear on Bridgestones (gti)
Posted: Tue Nov 24, 2020 3:49 pm
Afternoon everyone, After inspecting my tyers I noticed the outer edges have a little more wear then the rest of the thread it’s not huge but slightly noticeable, is this normal or am I just overthinking?
The car has covered approximately 6600miles, I’m running the original 18” Brescia wheels on the factory rock hard bridgestone turanza t001 tyers, I’ve set the tyre pressures to 37psi front and 35psi rear as I feel the recommended 41psi lacks traction at the best of times & is a much harder ride. I’m guessing 41psi is probably recommended for fuel economy if the tyers were under inflated the wear would be on both the inner and outer edges. Eventually when the Bridgestone’s need replacing I’ll get the Michelin PS4. Any information or recommendations is much appreciated thanks in advance. I’ve also added a picture of the rear tyre for comparison.
The car has covered approximately 6600miles, I’m running the original 18” Brescia wheels on the factory rock hard bridgestone turanza t001 tyers, I’ve set the tyre pressures to 37psi front and 35psi rear as I feel the recommended 41psi lacks traction at the best of times & is a much harder ride. I’m guessing 41psi is probably recommended for fuel economy if the tyers were under inflated the wear would be on both the inner and outer edges. Eventually when the Bridgestone’s need replacing I’ll get the Michelin PS4. Any information or recommendations is much appreciated thanks in advance. I’ve also added a picture of the rear tyre for comparison.