Page 1 of 1

Variable luggage compartment floor

Posted: Mon Apr 26, 2021 12:04 pm
by shaunreynolds
Hi all,

New to the group!!

I've a 2011 1.6 TDI but it is missing the Variable luggage compartment floor.

Have seen lots of what i think is the right part on ebay but just wanted to make sure with the plethora of knowledge that is out there.

As far as i can tell the part number is 6R0 858 855 B S07.

Is this the right part number???????

Just to be clear... the shelf i'm after makes the whole of the luggage area level when the seats are down :D :D

Thanks in advance

Re: Variable luggage compartment floor

Posted: Tue Apr 27, 2021 5:54 am
by FFA76
Your correct!
According to ETKA it's 6R0 858 855 B(1BS).

Re: Variable luggage compartment floor

Posted: Tue Apr 27, 2021 5:29 pm
by wolfie
The floor doesn't become absolutely flat with the raised boot floor in place, but it's as good as. There is a little step-up as it crosses the back of the folded down seats. Nothing much just 20mm ish.

I'm sure you'll will have checked but you will also need the LH & RH support brackets if they are not already fitted.

6R0 858 855 B 1BS (Anthracite)
6R0 858 855 B 1B (Black)

6R0 858 847 VAG (LH)
6R0 858 848 VAG (RH)

N90969901 (Fasteners. M6 X 25mm, Hex socket heads) X 4

Re: Variable luggage compartment floor

Posted: Wed May 19, 2021 8:51 am
by shaunreynolds
FFA76 wrote: Tue Apr 27, 2021 5:54 am Your correct!
According to ETKA it's 6R0 858 855 B(1BS).
Many thanks!!

Re: Variable luggage compartment floor

Posted: Wed May 19, 2021 8:52 am
by shaunreynolds
wolfie wrote: Tue Apr 27, 2021 5:29 pm The floor doesn't become absolutely flat with the raised boot floor in place, but it's as good as. There is a little step-up as it crosses the back of the folded down seats. Nothing much just 20mm ish.

I'm sure you'll will have checked but you will also need the LH & RH support brackets if they are not already fitted.

6R0 858 855 B 1BS (Anthracite)
6R0 858 855 B 1B (Black)

6R0 858 847 VAG (LH)
6R0 858 848 VAG (RH)

N90969901 (Fasteners. M6 X 25mm, Hex socket heads) X 4
Fitted with... thanks for the info!!